[Jun-2024] NSE5_FMG-7.0 PDF Dumps Are Helpful To produce Your Dreams Correct QA's [Q26-Q49]

4/5 - (1 vote)

[Jun-2024] NSE5_FMG-7.0 PDF Dumps Are Helpful To produce Your Dreams Correct QA’s

New NSE5_FMG-7.0 exam Free Sample Questions to Practice

Fortinet NSE5_FMG-7.0 certification exam is designed for network security professionals who wish to validate their skills and knowledge in managing and administering FortiManager 7.0. FortiManager is a centralized network security management solution that enables administrators to control and monitor security policies across multiple Fortinet devices, including firewalls, switches, and access points. Fortinet NSE 5 – FortiManager 7.0 certification exam is intended for individuals who have a good understanding of network security concepts and have hands-on experience with FortiManager.

NO.26 What will happen if FortiAnalyzer features are enabled on FortiManager?

FortiManager will reboot

FortiManager will send the logging configuration to the managed devices so the managed devices will start sending logs to FortiManager

FortiManager will enable ADOMs automatically to collect logs from non-FortiGate devices

FortiManager can be used only as a logging device.

NO.27 What does the diagnose dvm check-integrity command do? (Choose two.)

Internally upgrades existing ADOMs to the same ADON version in order to clean up and correct the ADOM
syntax

Verifies and corrects unregistered, registered, and deleted device states

Verifies and corrects database schemas in all object tables

Verifies and corrects duplicate VDOM entries

NO.28 An administrator would like to review, approve, or reject all the firewall policy changes made by the junior
administrators.
How should the Workspace mode be configured on FortiManager?

Set to workflow and use the ADOM locking feature

Set to read/write and use the policy locking feature

Set to normal and use the policy locking feature

Set to disable and use the policy locking feature

NO.29 When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?

After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.

FortiManager will revert and install a previous configuration revision on the managed FortiGate.

FortiGate will reject the CLI commands that will cause the tunnel to go down.

FortiManager will not push the CLI commands as a part of the installation that will cause the tunnel to go down.

NO.30 Refer to the exhibit.

An administrator has configured the command shown in the exhibit on FortiManager. A configuration change has been installed from FortiManager to the managed FortiGate that causes the FGFM tunnel to go down for more than 15 minutes.
What is the purpose of this command?

It allows FortiGate to unset central management settings.

It allows FortiGate to reboot and recover the previous configuration from its configuration file.

It allows the FortiManager to revert and install a previous configuration revision on the managed FortiGate.

It allows FortiGate to reboot and restore a previously working firmware image.

NO.31 An administrator would like to create an SD-WAN using central management. What steps does the administrator need to perform to create an SD-WAN using central management?

First create an SD-WAN firewall policy, add member interfaces to the SD-WAN template and create a static route

You must specify a gateway address when you create a default static route

Remove all the interface references such as routes or policies

Enable SD-WAN central management in the ADOM, add member interfaces, create a static route and SDWAN firewall policies.

NO.32 An administrator has assigned a global policy package to a new ADOM called ADOM1. What will happen if the administrator tries to create a new policy package in ADOM1?

When creating a new policy package, the administrator can select the option to assign the global policy package to the new policy package

When a new policy package is created, the administrator needs to reapply the global policy package to ADOM1.

When a new policy package is created, the administrator must assign the global policy package from the global ADOM.

When the new policy package is created, FortiManager automatically assigns the global policy package to the new policy package.

NO.33 View the following exhibit, which shows the Download Import Report:

Why it is failing to import firewall policy ID 2?

The address object used in policy ID 2 already exist in ADON database with any as interface association and conflicts with address object interface association locally on the FortiGate

Policy ID 2 is configured from interface any to port6 FortiManager rejects to import this policy because any interface does not exist on FortiManager

Policy ID 2 does not have ADOM Interface mapping configured on FortiManager

Policy ID 2 for this managed FortiGate already exists on FortiManager in policy package named Remote-FortiGate.

NO.34 What is the purpose of ADOM revisions?

To create System Checkpoints for the FortiManager configuration.

To save the current state of the whole ADOM.

To save the current state of all policy packages and objects for an ADOM.

To revert individual policy packages and device-level settings for a managed FortiGate by reverting to a specific ADOM revision

NO.35 Refer to the exhibit.

Given the configuration shown in the exhibit, which two statements are true? (Choose two.)

It allows two or more administrators to make configuration changes at the same time, in the same ADOM.

It disables concurrent read-write access to an ADOM.

It allows the same administrator to lock more than one ADOM at the same time.

It is used to validate administrator login attempts through external servers.

NO.36 An administrator has assigned a global policy package to a new ADOM called ADOM1. What will happen if the administrator tries to create a new policy package in ADOM1?

When creating a new policy package, the administrator can select the option to assign the global policy
package to the new policy package

When a new policy package is created, the administrator needs to reapply the global policy package to
ADOM1.

When a new policy package is created, the administrator must assign the global policy package from the global ADOM.

When the new policy package is created, FortiManager automatically assigns the global policy package to the new policy package.

NO.37 What is the purpose of the Policy Check feature on FortiManager?

To find and provide recommendation to combine multiple separate policy packages into one common
policy package

To find and merge duplicate policies in the policy package

To find and provide recommendation for optimizing policies in a policy package

To find and delete disabled firewall policies in the policy package

NO.38 Which two items are included in the FortiManager backup? (Choose two.)

FortiGuard database

Global database

Logs

All devices

NO.39 Which of the following statements are true regarding reverting to previous revision version from the revision history? (Choose two.)

To push these changes to a managed device, it required an install operation to the managed FortiGate.

Reverting to a previous revision history will generate a new version ID and remove all other history

Reverting to a previous revision history will tag the device settings status as Auto-Update.

It will modify device-level database

NO.40 Refer to the exhibit.

Which two statements about the output are true? (Choose two.)

The latest revision history for the managed FortiGate does match with the FortiGate running configuration

Configuration changes have been installed to FortiGate and represents FortiGate configuration has been changed

The latest history for the managed FortiGate does not match with the device-level database

Configuration changes directly made on the FortiGate have been automatically updated to device-level

NO.41 An administrator with the Super_User profile is unable to log in to FortiManager because of an authentication failure message.
Which troubleshooting step should you take to resolve the issue?

Make sure FortiManager Access is enabled in the administrator profile

Make sure Offline Mode is disabled

Make sure the administrator IP address is part of the trusted hosts.

Make sure ADOMs are enabled and the administrator has access to the Global ADOM

NO.42 View the following exhibit.

Given the configurations shown in the exhibit, what can you conclude from the installation targets in the Install On column?

The Install On column value represents successful installation on the managed devices

Policy seq#3 will be installed on all managed devices and VDOMs that are listed under Installation Targets

Policy seq#3 will be installed on the Trainer[NAT] VDOM only

Policy seq#3 will be not installed on any managed device

NO.43 An administrator’s PC crashes before the administrator can submit a workflow session for approval. After the PC is restarted, the administrator notices that the ADOM was locked from the session before the crash.
How can the administrator unlock the ADOM?

Restore the configuration from a previous backup.

Delete the previous admin session manually through the FortiManager GUI or CLI.

NO.44 Refer to the exhibit.

Which two statements about the output are true? (Choose two.)

The latest revision history for the managed FortiGate does match with the FortiGate running configuration

Configuration changes have been installed to FortiGate and represents FortiGate configuration has been changed

The latest history for the managed FortiGate does not match with the device-level database

Configuration changes directly made on the FortiGate have been automatically updated to device-level

NO.45 An administrator has added all the devices in a Security Fabric group to FortiManager.
How does the administrator identify the root FortiGate?

By a dollar symbol ($) at the end of the device name

By an at symbol (@) at the end of the device name

By a

By an Asterisk (*) at the end of the device name

NO.46 View the following exhibit.

If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two.)

FortiGate is discovered by FortiManager through the FortiGate NATed IP address.

FortiGate can announce itself to FortiManager only if the FortiManager IP address is configured on
FortiGate under central management.

During discovery, the FortiManager NATed IP address is not set by default on FortiGate.

If the FCFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel.

NO.47 View the following exhibit.

When using Install Config option to install configuration changes to managed FortiGate, which of the following statements are true? (Choose two.)

Once initiated, the install process cannot be canceled and changes will be installed on the managed device

Will not create new revision in the revision history

Installs device-level changes to FortiGate without launching the Install Wizard

Provides the option to preview configuration changes prior to installing them

NO.48 Refer to the exhibit.

A junior administrator is troubleshooting a FortiManager connectivity issue that rs occurring with managed FortiGate devices Given the FortiManager device manager settings shown in the exhibit what can you conclude from the exhibit?

The administrator had restored the FortiManager configuration file

The administrator must refresh both devices to restore connectivity

FortiManager test internet connectivity therefore, both devices appear to be down

The administrator can reclaim the FGFM tunnel to get both devices online

NO.49 Refer to the exhibit.

An administrator logs into the FortiManager GUI and sees the panes shown in the exhibit.
Which two reasons can explain why the FortiAnalyzer feature panes do not appear? (Choose two.)

The administrator logged in using the unsecure protocol HTTP, so the view is restricted.

The administrator profile does not have full access privileges like the Super_User profile.

The administrator IP address is not a part of the trusted hosts configured on FortiManager interfaces.

FortiAnalyzer features are not enabled on FortiManager.

Fortinet NSE5_FMG-7.0 Certification Exam is designed to assess the knowledge and skills of network security professionals in managing and deploying Fortinet’s FortiManager 7.0 solution. NSE5_FMG-7.0 exam is ideal for network administrators, security analysts, and IT professionals who want to validate their expertise in managing and administering security policies and devices using FortiManager 7.0.

Cover NSE5_FMG-7.0 Exam Questions Make Sure You 100% Pass: https://www.real4prep.com/NSE5_FMG-7.0-exam.html