HPE7-A01 Exam Dumps - Try Best HPE7-A01 Exam Questions from Training Expert Real4Prep [Q85-Q103]

5/5 - (1 投票)

HPE7-A01 Exam Dumps – Try Best HPE7-A01 Exam Questions from Training Expert Real4Prep

Practice Examples and Dumps & Tips for 2026 Latest HPE7-A01 Valid Tests Dumps

HP HPE7-A01 exam is an important certification for IT professionals who want to demonstrate their expertise in wireless networking. It is recognized globally and is highly valued by employers. Aruba Certified Campus Access Professional Exam certification is also a prerequisite for higher-level certifications in Aruba networking, such as the Aruba Certified Mobility Professional (ACMP) and the Aruba Certified Mobility Expert (ACMX). By passing the HPE7-A01 exam, IT professionals can enhance their career prospects and improve their earning potential.

Q85. Which statement about Aruba ClearPass Policy Manager is correct?

It is primarily used for device firmware management.

It serves as a gateway for all network traffic.

It provides network access control and policy management.

It only supports wireless authentication protocols.

Q86. When configuring UBT on a switch what will happen when a gateway role is not specified?

The switch will put the client on the access VLAN

The gateway will assign a default role to the client

The switch will assign the default deny role to the client.

The gateway will send back the deny role to the client.

Q87. In AOS 10. which session-based ACL below will only allow ping from any wired station to wireless clients but will not allow ping from wireless clients to wired stations”? The wired host ingress traffic arrives on a trusted port.

ip access-list session pingFromWired any user any permit

ip access-list session pingFromWired user any svc-icmp deny any any svc-icmp permit

ip access-list session pingFromWired any any svc-icmp permit user any svc-icmp deny

ip access-list session pingFromWired any any svc-icmp deny any user svc-icmp permit

Q88. When configuring UBT on a switch what will happen when a gateway role is not specified?

The switch will put the client on the access VLAN

The gateway will assign a default role to the client

The switch will assign the default deny role to the client.

The gateway will send back the deny role to the client.

Q89. Which component is used by the Aruba Network Analytics Engine (NAE)?

JSON-based scripts

Lisp-based agents

Ruby-based scripts

Current State Database

Q90. What are the requirements to ensure that WMM is working effectively’? (Select two)

The APs and the controller are Wi-Fi CERTIFIED for WMM which is enabled

All APs need to be from the AP-5xx series and AP-6xx series which are Wi-Fi CERTIFIED 6.

The Client must be Wi-Fi CERTIFIED for WMM and configured for WMM marking.

The Aruba AOS10 APs installed have to be converted to controlled mode

The AP needs to be connected via a tagged VLAN to the wired port

Q91. Your customer is having connectivity issues with a newly-deployed Microbranch group The access points in this group are online in Aruba Central, but no VPN tunnels are forming..
What is the most likely cause of this issue?

There is a time difference between the AP and the gateways The gateways should have NTP added

The SSL certificate on the gateway used to encrypt the connection has not been added to the APs trust list

There may be a firewall blocking GRE tunneling between the AP and the gateway

The gateway group is running in automatic cluster mode and should be in manual cluster mode

Q92. You need to have different routing-table requirements with Aruba CX 6300 VSF configuration.
Assuming the correct layer-2 VLAN already exists, how would you create a new SVI for a separate routing table?

Create a new routing table, and attach VLANs to it.

Create a new VLAN, and attach the VRF to it.

Create a new interface VLAN and attach vrf custom-vrf.

Create a new VRF, and add new SVI under the configuration.

Q93. Which two statements regarding HPE Aruba Networking Network Analytics Engine (NAE) agents are true? (Choose two.)

A single NAE script can be used by multiple NAE agents

NAE agents are active at all times

NAE agents will never consume more than 10% of switch processor resources

NAE scripts must be reviewed and signed by Aruba before being used

A single NAE agent can be used by multiple NAE scripts.

Q94. you need to have different routing-table requirements With Aruba CX 6300 VSF configuration.
Assuming the correct layer-2 VLAN already exists, how would you create a new SVI for a separate routing table?

create a new VLAN, and attach the VRF to it.

Create a new routing table, and attach VLANS to it

Create a new SVI and use attach command.

Create a new VLAN. and attach the routing table to it

Q95. You are deploying Aruba CX 6300’s with the customers requirement to only allow one (1) VoIP phone and one (1) device.
The following local role gets assigned to the phone
port-access rote VoIP device-traffic-class voice
What set of commands best fits this requirement?

interface 1/1/1
aaa authentication port-access client-limit 2
aaa authentication port-access auth-mode client-mode

interface 1/1/1
aaa authentication port-access auth-mode multi-domain

interface 1/1/1
aaa authentication port-access client-limit multi-domain 2 aaa authentication port-access auth-mode multi-domain

interface 1/1/1
aaa authentication port-access client-limit 1
aaa authentication port-access auth-mode device-mode

Q96. Your customer has asked you to assign a switch management role for a new user The customer requires the user role to only have Web Ul access to the System > Log page and only have access to the GET method for REST API for the /logs/event resource Which default AOS-CX user role meets these requirements?

administrators

auditors

sysops

operators

Q97. What is an OSPF transit network?

a network that uses tunnels to connect two areas

a special network that connects two different areas

a network on which a router discovers at least one neighbor

a network that connects to a different routing protocol

Q98. Drag and Drop Question
Match the solution components of HPE Aruba Networking Central NetConductor (Options may be used more than once or not at all.)

Q99. Your customer has an Aruba CX 6200F VSF stack with two switches. A third member (JL726A) needs to be added to the VSF configuration.
What e the configuration that enables the new devices to join the VSF?

Q100. A customer wants to enable wired authentication across all their CX switches One of the requirements is that the switch must be able to authenticate a single computer connected through a VoIP phone.
Which feature should be enabled to support this requirement?

Multi-Domain Authentication

Device-Based Mode

MAC Authentication

Multi-Auth Mode

Q101. Your Aruba CX 6300 VSF stack has OSPF adjacency over SVI 10 with LAG 1 to a neighboring device The following configuration was created on the switch:

Q102. A customer is using a legacy application that communicates at layer-2. The customer would like to keep this application working to a remote site connected via layer-3 All legacy devices are connected to a dedicated Aruba CX 6200 switch at each site.
What technology on the Aruba CX 6200 could be used to meet this requirement?

Inclusive Multicast Ethernet Tag (IMET)

Ethernet over IP (EolP)

Generic Routing Encapsulation (GRE)

Static VXLAN

Q103. When configuring UBT on a switch what will happen when a gateway role is not specified?

The switch will put the client on the access VLAN

The gateway will assign a default role to the client

The switch will assign the default deny role to the client.

The gateway will send back the deny role to the client.

HP HPE7-A01 exam is intended for network professionals who work with Aruba WLAN solutions and have a minimum of two years of experience in designing and implementing wireless solutions. HPE7-A01 exam is ideal for network engineers, network administrators, and wireless engineers who want to validate their skills and gain recognition for their expertise in wireless networking. By obtaining the ACCP certification, professionals can differentiate themselves in the job market and demonstrate their commitment to ongoing professional development in the field of wireless networking.

Latest 100% Passing Guarantee – Brilliant HPE7-A01 Exam Questions PDF: https://www.real4prep.com/HPE7-A01-exam.html