[2026] Use Valid New Free 156-315.82 Exam Dumps & Answers [Q47-Q68]

Rate this post

[2026] Use Valid New Free 156-315.82 Exam Dumps & Answers

156-315.82 Braindumps PDF, CheckPoint 156-315.82 Exam Cram

CheckPoint 156-315.82 Exam Syllabus Topics:

Section	Weight	Objectives
Topic 1: Advanced High Availability and Clustering	20%	– Management High Availability 1. Synchronization and maintenance 2. Deployment and failover procedures – ClusterXL Advanced Features 1. State synchronization and troubleshooting 2. Load sharing modes and configuration – ElasticXL Cluster 1. Performance optimization 2. Scalable clustering deployment
Topic 2: Advanced Security Technologies	15%	– Endpoint Security 1. Policy deployment and monitoring 2. SandBlast Agent and Harmony Endpoint integration – Threat Prevention Optimization 1. Tuning and fine-tuning protections 2. False positive management – Identity Awareness Advanced 1. Identity-based policy enforcement 2. Integration with external identity sources
Topic 3: Monitoring, Troubleshooting and Debugging	10%	– Advanced Logging and Monitoring 1. SmartLog and SmartEvent advanced usage 2. Custom reporting and alerting – Debug and Diagnostic Tools 1. fw monitor, vpn debug, fw ctl zdebug 2. Kernel and network debugging
Topic 4: Advanced VPN and Routing	20%	– Remote Access VPN 1. Advanced configuration and troubleshooting 2. Endpoint security integration – Advanced Routing 1. Dynamic routing protocols 2. Redistribution and filtering – Site-to-Site VPN Enhancements 1. MEP, Permanent Tunnels and Link Selection 2. Route-based VPN with VTIs 3. IKEv2 features and deployment
Topic 5: Advanced Deployment and Management	20%	– Multi-Domain Security Management 1. Management High Availability 2. Global Policy and Domain management – Automation and Management Tools 1. SmartProvisioning 2. mgmt_cli and REST API usage – System Maintenance and Upgrades 1. Backup, Restore and Migration procedures 2. CPUSE and Jumbo Hotfix Accumulators
Topic 6: VSX Virtualization	15%	– VSX Architecture and Deployment 1. Resource allocation and isolation 2. Virtual Systems, Routers and Switches – VSX Management and Monitoring 1. Policy management per virtual device 2. Logging and troubleshooting

Q47. What are SmartEvent Features and Capabilities?

300+ Check Point Security Best Practices, Monitoring in real time policy changes, Regulatory standards Best Practices

Full threat visibility, Real-time forensics, Immediate response

SmartDashboards, SmartLogs, SmartEvents

Compliance Reports, Events Logs and Reports, Best Practices Tests

Q48. Which process is responsible for the code generation and compilation of Legacy Dump files?

FWM

CPM

Stateful Compiler

Inspect Engine

Q49. The Management Server Database is exported during an Advanced Upgrade and later imported on a freshly deployed Management Server. The items that go along with this export include:

Only objects are exported and imported with the database. Policies, certificates, and other settings are not included.

Only objects and policies are exported with the database. Certificates are stored in a reserved area and cannot be exported.

Network and routing configuration and all settings of the Check Point environment.

Objects, policies, certificates, and other settings of the Check Point environment.

Q50. In the Management HA environment how many synchronization methods are supported?

Q51. What is the correct description for the Dynamic Balancing / Spit feature?

Dynamic Balancing / Split dynamically change the number of SND’s and firewall instances based on the current load. It is only available on Quantum Appliances (not on Quantum Spark or Open Server)

Dynamic Balancing / Split dynamically distribute the traffic from one network interface to multiple SND’s. The interface must support Multi-Queue. It is only available on Quantum Appliances (not on Quantum Spark or Open Server)

Dynamic Balancing / Split dynamically change the number of SND’s and firewall instances based on the current load. It is only available on Quantum Appliances and Open Server (not on Quantum Spark)

Dynamic Balancing / Spit dynamically distribute the traffic from one network interface to multiple SND’s. The interface must support Multi-Queue. It is only available on Quantum Appliances and Open Server (not on Quantum Spark)

Q52. Which of the following commands is correct when importing a database?

migrate import -v R82 /Path/ExportFileName

migrate_server import -v R82 /Path/ExportFileName

import database -v R82 /Path/ExportFileName

migrate_server -v R82 /Path/ExportFileName

Q53. Alice and Bob are tasked to integrate a Check Point IPsec VPN solution. Which of the following statements is true?

Confidentiality – Uses standard authentication methods.

Integrity – All VPN data is encrypted.

Authenticity – All VPN data is encrypted.

Confidentiality – All VPN data is encrypted.

Q54. While working in the Compliance tab, you have identified under Security Best Practices Compliance a score of 25% for Poor. You click on Poor to review the Security Best Practices with Status Poor. What should you do next?

De-Activate each Poor Best Practice and add a Comment before clicking OK

Change the Status of each Best Practice to Good.

Analyze each Best Practice and review the details, investigate and take action where possible.

After reviewing, right click each Active Best Practice and click Correct and deactivate. The Copilot will configure the settings according to Best Practices.

Q55. How many packets are used in Aggressive Mode for negotiation?

Q56. While working in the Compliance tab, you have identified under Security Best Practices Compliance a score of 25% for Poor. You click on Poor to review the Security Best Practices with status Poor. What should you do next?

Deactivate each Poor Best Practice and add a comment before clicking OK.

Change the status of each Best Practice to Good.

Analyze each Best Practice, review the details, investigate, and take action where possible.

After reviewing, right-click each Active Best Practice and click Correct and deactivate. The Copilot will configure the settings according to Best Practices.

Q57. Which Management Server is Primary?

It’s the Management Server with the highest firmware version and JHF

It’s the current Active Management Server

It’s the every Management Server that is not Standby

It’s the first installed Management Server

Q58. SmartEvent reports can be exported to which formats?

CSV, XLS, DOC

PDF, DOC, CSV

PDF, CSV

TXT, CSV, PDF

Q59. Which process is responsible for the code generation and compilation of legacy dump files?

FWM

CPM

Stateful Compiler

Inspect Engine

Q60. When the CPM process does a Modern Dump, what is happening?

CPM is using a new version of PostgreSQL to optimize the policy installation and allow it to happen faster.

When doing backups in Gaia, CPM uses Modern Dump and is able to export the database faster in R8x versions than previous versions.

Pre-generated code does not require further compilation or verification before transfer to the Security Gateway.

CPM can bypass FWM and install updated and new rules directly to the Security Gateway.

Q61. Which blade can suggest corrective measures to help with security issues?

SmartEvent

Monitoring Blade

VPN

Compliance Blade

Q62. Alice & Bob are tasked to integrate a Check Point IPSEC VPN Solution. Which of the following statements is true?

Confidentiality – Uses standard authentication methods

Integrity – All VPN data is encrypted

Authenticity – All VPN data is encrypted

Confidentiality – All VPN data is encrypted

Q63. What is a key feature of the Compliance Blade?

The Blade uses Continuous Compliance Monitoring technology to examine the Management Server and configuration settings.

The Blade uses Check Point Compatibility Mode technology to examine the Security Gateways, policies, and configuration settings.

The Blade uses Continuous Compliance Monitoring technology to check the integrity of the PostgreSQL database on the Security Management Server.

The Blade uses Continuous Compliance Monitoring technology to examine the Security Gateways, policies, and configuration settings.

Q64. During Conversion of the Security Policy, the compiled code is stored in which directory?

In the $FWDIR/state/<Gateway Name>/FW1 directory of the Gateway

In the /etc/fw.boot/modules/ Directory of the Management Server.

In the $FWDIR/state/<Gateway Name>/FW1 directory of the Management Server

In the $CPDIR/state/<Gateway Name>/FW1 directory of the Management Server

Q65. In Management HA, changes in policy and objects are performed through the Active server. What happens if the Active server fails or is taken offline?

One of the Standby servers must be promoted to Primary Management Server to make it Active.

The Standby server with the highest priority set by the administrator automatically becomes Active.

A changeover can be initiated manually to make a Standby server become Active.

The closest Standby server will immediately become Active within 3 seconds.

Q66. Network Feed objects are used as a Source or Destination in Access Control, HTTPS Inspection, and Threat Prevention Policies. What file formats are supported for download in Network Feed objects?

Flat list only

Flat list and XML

JSON only

Flat list or JSON

Q67. When using SmartEvent, what feature can be used to analyze previously generated log files for Event Policy analysis?

The command CPLogInvestigator -f < log file name >

SmartEvent can only analyze new incoming logs or logs less than 24 hours old.

Correlation Unit > Add > Historical Log Analysis

An Offline Job

Q68. How many Secondary Security Management Servers does Check Point allow a customer to deploy?

On-premises deployments allow only one Secondary server. Public cloud deployments allow multiple Secondary servers.

You can install only one Secondary Security Management Server. The licenses limit the solution to only one Standby server.

You can install one or more Secondary Security Management Servers.

You can install only one Security Management Server. The Active server can only synchronize to one Standby server.

Feel CheckPoint 156-315.82 Dumps PDF Will likely be The best Option: https://www.real4prep.com/156-315.82-exam.html

Real Exam Prep Dumps

[2026] Use Valid New Free 156-315.82 Exam Dumps & Answers [Q47-Q68]

CheckPoint 156-315.82 Exam Syllabus Topics:

發佈留言取消回覆

CheckPoint 156-315.82 Exam Syllabus Topics:

Related Posts

Latest 156-835 Exam Dumps CheckPoint Exam from Training Expert Real4Prep [Q16-Q38]

CheckPoint 156-560 Real Exam Questions Guaranteed Updated Dump from Real4Prep [Q19-Q39]

Pass CheckPoint 156-835 Actual Free Exam Q&As Updated Dump Feb 14, 2023 [Q26-Q45]

New 2023 Realistic Free CheckPoint 156-835 Exam Dump Questions & Answer [Q21-Q37]

發佈留言 取消回覆

發佈留言取消回覆