Pass Your Exam With 100% Verified 350-501 Exam Questions [Q201-Q218]

4.5/5 - (2 votes)

Pass Your Exam With 100% Verified 350-501 Exam Questions

350-501 Dumps PDF – 350-501 Real Exam Questions Answers

Cisco 350-501 (Implementing and Operating Cisco Service Provider Network Core Technologies) Certification Exam is a popular certification exam offered by Cisco. 350-501 exam is designed for network administrators, engineers, and technicians who focus on service provider network infrastructure. 350-501 exam tests the candidate’s knowledge and skills in implementing and operating core network technologies in a service provider environment. 350-501 exam covers a wide range of topics including routing protocols, MPLS, network automation, and security, among others. Passing 350-501 exam is a key step towards earning the Cisco Certified Specialist – Service Provider Core certification.

Cisco 350-501 exam is a 120-minute exam consisting of 60-70 questions. 350-501 exam is available in English and Japanese and can be taken at any Pearson VUE testing center worldwide. Candidates who pass the exam will receive the Cisco Certified Specialist – Service Provider Core certification, which is a valuable credential for network engineers looking to advance their career in the service provider industry.

NO.201 Refer to the exhibit:

Which two statements about the ISIS topology are true? (Choose two.)

All four routers are operating as Level 1 routers only.

All four routers are operating as Level 2 routers only.

All four routers are operating as Level 1-2 routers.

R1 and R2 are Level 2 neighbors.

R1 and R4 are Level 2 neighbors

NO.202 An engineer is setting up overlapping VPNs to allow VRF ABC and XYZ to communicate with VRF CENTRAL but wants to make sure that VRF ABC and XYZ cannot communicate. Which configuration accomplishes these objectives?

Option A

Option B

Option C

Option D

NO.203 Refer to the exhibit.

A network engineer is deploying SNMP configuration on client’s routers. Encrypted authentication must be included on router 1 to provide security and protect message confidentially. Which action should the engineer perform on the routers to accomplish this task?

snmp-server host 192.168.0.254 informs version 3 auth testuser config.

snmp-server user testuser group 1 remote 192.168.0.254 v3 auth md5 testpassword

snmp-server group group 1 v3 auth.

snmp-server community public

NO.204

Refer to the exhibit. Which three outcomes occur if the prefix list is added to the neighbor? (Choose three.)

192.168.0.0/16 is denied.

192.168.0.0/16 is permitted.

192.168.0.0/19 is permitted

192.168.0.0/19 is denied.

192.168.0.0/17 is permitted

192.168.0.0/17 is denied.

Section: Architecture

NO.205 Refer to the exhibit. You are configuring an administrative domain implement so that devices can dynamically learn the RP?

SSM

BID1R-PIM

BSR

Auto-RP

BSR is a standard and included in PIMv2, unlike AutoRP which is a Cisco proprietary protocol.
Although Auto-RP has been adopted by some vendors, it’s still not an “industry standard”.

NO.206 Which statement about TLS is accurate when using RESTCONF to write configurations on network devices’?

It requires certificates for authentication.

It is provided using NGINX acting as a proxy web server

It is used for HTTP and HTTPS requests.

It is not supported on Cisco devices

NO.207 Refer to the exhibit.

An engineer is configuring an administrative domain in the given multi-vendor environment with PIM-SM. Which feature must the engineer implement so that devices will dynamically learn the RP?

Auto-RP

BIDIR-PIM

SSM

BSR

NO.208 An engineer is setting up overlapping VPNs to allow VRF ABC and XYZ to communicate with VRF CENTRAL but wants to make sure that VRF ABC and XYZ cannot communicate. Which configuration accomplishes these objectives?
A)

B)

C)

Option A

Option B

Option C

NO.209 Refer to the exhibit.

An engineer wants to determine which paths are best, second best, third best, and fourth best. Drag and drop the peer addresses on the left to the corresponding BGP best-path selection order on the right.

Explanation
Best – 50.50.50.2
2nd Best – 40.40.40.2
3rd Best – 20.20.20.2
44th Best – 30.30.30.2

NO.210 Refer to the exhibit:

Which statement about this configuration is true”?

It requires an explicit Cisco MPLS TE path to be configured for the tunnel to run

It requires OSPF to also be running to have optimized Cisco MPLS TE tunnels

It requires a dynamic Cisco MPLS TE path to be configured for the tunnel to run

It is the configuration for the head-end router of a Cisco MPLS TE tunnel with segment routing

NO.211 Refer to the exhibit:

Which information is provided for traceback analysis when this configuration is applied?

BGP version

packet size distribution

source interface

IP sub flow cache

NO.212 Refer to the exhibit.

A network engineer must configure an LDP neighborship between two newly installed routers that are located in two different offices. Router 1 is the core router in the network and it has already established OSPF adjacency with router 2. On router 1 and router 2. interface fa0/0 is configured for BFD. Which additional configuration must the engineer apply to the two devices to meet the requirement?

Router1(config)#int fa0/0 –
Router1(config-if)#mpls ldp autoconfig
Router2(config)#router ospf 1 –
Router2(config-router)#mpls ip

Router1(config)#int fa0/0 –
Router1(config-if)#mpls ip –
Router1(config-if)#mpls ldp discovery transport-address interface
Router2(config)#int fa0/0 –
Router2(config-if)#mpls ip –
Router2(config-if)#mpls ldp discovery transport-address interface

Route1(config)#int fa0/0 –
Router1(config-if)#mpls ldp autoconfig
Router1(config-if)#mpls ldp discovery interface
Router2(config)#router ospf 1 –
Router2(config-router)#mpls ldp autoconfig
Router2(config-if)#mpls ldp discovery interface

Router1(config)#int fa0/0 –
Router1(config-if)#mpls ip –
Router2(config)#router ospf 1 –
Router2(config-router)#mpls ldp autoconfig

NO.213

Refer to the exhibit. A network engineer is implementing a standard customer route-policy on router ASBR1 with these requirements:
* It must accept only customer-assigned prefixes.
* It must preserve customer-advertised BGP communities.
* It must set the local-preference to 110 for all prefixes.
* It must attach the ORIGINATION-PE and LOCAL-CITY communities to all accepted prefixes.
Which route policy must the engineer implement on ASBR1 to satisfy the requirements?

Section: Networking

NO.214 Refer to the exhibit:

Which statement about the neighbor statements for 192.168.1.1 is true?

The router must have TDP configured for the send-label command to operate

The neighbor router receives at least four labels from this router

The router sends BGP labels for its prefixes to this peer

The router sends only a label for the prefix for LoopbackO.

NO.215

Refer to the exhibit. Which statement describes the effect of this configuration?

It matches HTTP traffic for use in a policy map.

It applies a service policy to all interfaces remarking HTTP traffic.

It creates an ACL named WEB that filters HTTP traffic.

It modifies the default policy map to allow all HTTP traffic through the router.

Section: Services

NO.216 A service provider is using QoS to manage customer traffic over the MPLS backbone.
Which three statements about the behavior of each MPLS QoS mode based on QoS policy in the service provider core are true? (Choose three.)

Uniform mode does not change the original CE IP packet markings.

Uniform mode changes the original CE IP packet markings.

Pipe mode does not change the original CE IP packet markings.

Pipe mode changes the original CE IP packet markings.

Short-pipe mode does not change the original CE IP packet markings.

Short-pipe mode changes the original CE IP packet markings.

NO.217 Refer to the exhibit. What is significant about the number 2 in the configuration?