Data point comments are a feature that allows you to add comments to specific data points in a story. You can use data point comments to provide additional information, context, or feedback on the dat a. You can also reply to, edit, or delete existing comments. Data point comments are supported for the following models:
Import models
Planning models
Blended models
Data point comments are not supported for live models, such as SAP S/4HANA live model or BPC live model. Therefore, the correct answer is Import planning model and Blended model, as they are the models that support data point comments.
Data point comments are comments that you can add to a specific value in a table or a comment widget. They are similar to commenting on a single cell in Microsoft Excel. Data point comments are associated with the models, which means that they will appear in any story that uses the same model and has the same value in a table or a comment widget1.
Data point comments can be added to the following models:
Import planning model: This is a model that you create by importing data from a file or a database. You can use this model for planning scenarios, such as budgeting, forecasting, or what-if analysis. You can enable data point comments for this model by selecting the Allow Data Point Comments option in the model properties2.
BPC live model: This is a model that you create by connecting to a SAP Business Planning and Consolidation (BPC) system. You can use this model for real-time planning and analysis with BPC data. You can enable data point comments for this model by selecting the Allow Data Point Comments option in the model properties3.
Data point comments cannot be added to the following models:
SAP S/4HANA live model: This is a model that you create by connecting to a SAP S/4HANA system. You can use this model for real-time analysis with SAP S/4HANA data. However, this model does not support data point comments, because it is read-only and does not allow any changes to the data4.
Blended model: This is a model that you create by blending data from two or more models. You can use this model for combining and analyzing data from different sources. However, this model does not support data point comments, because it is derived from other models and does not have its own data.
Reference:
1: Using Data Point Comments – SAP Learning 2: Creating an Import Planning Model – SAP Learning 3: Creating a BPC Live Model – SAP Learning 4: Creating an SAP S/4HANA Live Model – SAP Learning : [Blending Data from Multiple Models – SAP Learning]

When break grouping is enabled, the sort is applied to the inner dimension of the chart or table, according to the SAP Analytics Cloud Help1. Break grouping is a feature that allows you to sort data points in a chart or table by breaking the grouping of the dimensions in the category axis2. For example, if you have a chart with two dimensions in the category axis, such as Country and Product, and you enable break grouping, you can sort the data points by Product instead of Country2. This can help you compare the performance of different products across countries. You can also choose to sort by measure values or custom order2.
The other options are not correct. Option A. The outer dimension is the dimension that is not affected by the break grouping feature. Option C. The vertical dimension and option D. The horizontal dimension are not relevant terms for break grouping, as it depends on how you arrange the dimensions in the category axis.
1: Apply Smart Grouping to Charts in Analytic Applications | SAP Help Portal 2: Sort Data Points in Charts and Tables | SAP Help Portal

You can define a calculation for a table in three ways:
Table: You can add a simple calculation by selecting two measures in a table, right-clicking, choosing Add calculation, and choosing the calculation you want. You can also add a repeating or single column or row to a table by right-clicking on a measure or dimension and choosing Add Calculation1.
Calculation editor: You can open the calculation editor from the drop-down menu of Measures or Dimensions in the Designer Panel and create complex calculations for a chart or table. For each type of calculation, a new calculated member is created. You can also use dimension attributes as part of a calculation2.
Story: You can create a calculated measure in the Builder pane of a story. When setting up your calculation, you apply the typical formula functions, conditions, and operators to the data contained in your model. Calculated measures allow you to perform mathematical and Boolean operations on your data1.
Reference:
1: Calculating Data in Stories – SAP Learning 2: SAP Analytics Cloud In-story Calculation Series – An Introduction

The Custom Expression Editor is a tool that allows you to create complex calculations using a syntax called Wrangling Expression Language (WEL). WEL is a domain-specific language that is designed for data manipulation and analysis. WEL supports various operators, functions, and constants that you can use to create custom expressions. You can access the Custom Expression Editor from various places in SAP Analytics Cloud, such as models, stories, datasets, etc. Therefore, the correct answer is Wrangling Expression Language, as it is the language that the Custom Expression Editor uses. Verified Reference:: Create Custom Expressions with the Custom Expression Editor

According to the SAP Help Portal1, you can configure different add-ons for a chart to enhance its appearance and functionality. Some of the add-ons that are available are:
Variance: This add-on allows you to compare two measures and show the difference and percentage difference between them. You can also choose to display the variance as a bar, line, or area chart on top of the original chart2.
Scaling: This add-on allows you to adjust the scale of the chart axes to better fit the data range. You can choose to use a linear, logarithmic, or percentage scale for the axes3.
Linked Analysis: This add-on allows you to link multiple charts or tables that share the same data source. When you select a data point in one chart or table, the other linked charts or tables will filter accordingly4.
In-Cell Charts: This add-on allows you to display mini charts within the cells of a table. You can choose from different types of in-cell charts, such as bullet, bar, or sparkline charts5.
Therefore, Variance and In-Cell Charts are add-ons that can be configured for a chart, while Scaling and Linked Analysis are not.

The story option that can help you create a story as a launchpad to other stories is hyperlink. A hyperlink is a link that allows users to navigate from one location to another by clicking on it. You can use hyperlinks to link widgets, text, or images in a story to other stories in SAP Analytics Cloud, creating a launchpad effect. Input control, linked analysis, and RSS feed are not story options that can help you create a story as a launchpad to other stories; they are options that can help you filter data, link widgets, or display news feeds in a story. Verified Reference: [SAP Analytics Cloud – Hyperlinks]

The sort options that are available in stories are ascending and descending order, and multiple dimensions together. Ascending and descending order allow you to sort data by one or more dimensions or measures in ascending or descending order. Multiple dimensions together allow you to sort data by more than one dimension in a hierarchical order. Dimensions and measures together, and multiple measures together are not valid sort options in stories. Verified Reference: [SAP Analytics Cloud – Sorting]

A section is a way to group and organize widgets in a story based on a dimension. To create a section, you need to have the following:
A dimension that you want to use as the basis for grouping the widgets. You can choose any dimension from any model in the story.
One or more widgets that you want to display in each section. You can add any type of widget, such as charts, tables, geo maps, etc.
You can create sections in both the Classic Design Experience and the Optimized Design Experience, but the process is slightly different. Therefore, the correct answer is dimension and widget, as they are required to configure a section in a story

SAP Analytics Cloud에서 데이터를 랭글링하는 데 사용할 수 있는 데이터 소스 연결을 가져옵니다. 가져온 데이터 소스는 SAP Analytics Cloud에 업로드되어 내부 데이터베이스에 저장되는 데이터 파일입니다. 사용자는 데이터를 변환, 보강, 정리 및 병합할 수 있는 데이터 준비 기능을 사용하여 가져온 데이터 소스를 랭글링할 수 있습니다. 라이브 데이터 원본과 공개 데이터 원본은 SAP 분석 클라우드에서 데이터를 랭글링하는 데 사용할 수 없으며, 라이브 데이터 원본은 원래 시스템에 남아 있고 공개 데이터 원본은 SAP에서 제공하는 읽기 전용 데이터 집합입니다. 검증된 참조: [SAP 분석 클라우드 - 데이터 준비] 참조