[Sep 03, 2023] 1z0-1086-22 Test Engine files, 1z0-1086-22 Dumps PDF [Q24-Q48]

5/5 - (1 投票)

[Sep 03, 2023] 1z0-1086-22 Test Engine files, 1z0-1086-22 Dumps PDF

Latest Oracle 1z0-1086-22 PDF and Dumps (2023) Free Exam Questions Answers

NO.24 Which two items describe the information that you can find in the Custom Validation Report?

A list of system and application-specific validations

The actions and properties that trigger the validation check

A list of all manually created validations across all applications

The date and status of the last time a validation was run

NO.25 You want to enforce the “four-eyes” principle for your approval policy. How can you do this?

Use a serial approval method.

Use any approval method with at least three different approval groups.

Use any approval method and do not select “Include Submitter”.

Use a parallel approval method.

NO.26 What conditions should be met to enable a custom validation?

A derived property of the Custom Validation node type that returns a Boolean value is defined.

An expression that returns a Boolean value and a failure message are defined.

A trigger property and a trigger action for a node set or hierarchy set is configured.

A valid expression and a failure message are defined, at least one trigger action and/or a trigger property is configured.

NO.27 You want to map two general ledger systems, GL1 and GL2, to a single EPM Planning application. It is time to synchronize changes by exporting the plan account mappings. Which statement about mapping keys is true?

You need only one mapping key and location to export the plan account mappings.

You need two mapping keys, one for GLl-to-Planning and one for GL2-to-Planning. When you export a mapping, you select the location with its associated mapping key.

You create shadow mapping keys in the target application to represent the values coming from GL1 and GL2, respectively.

You create one location per mapping key, where a mapping key is a unique source-target combination.

NO.28 You are an assignee for a subscription that listens for changes in a source viewpoint, and auto-submit is not enabled.
What happens when a request is submitted that changes the source viewpoint?

The system sends you a notification of the original source request and includes a link to manually convert it to a new request for the target viewpoint.

The system sends you a notification with an attachment of the original request items, which you can then load into a new request.

The system converts the original request items into a new subscription request for the target viewpoint and sends you a notification to review and submit the request.

The system sends you a notification of the original source request, which you can then review and copy into your target viewpoint.

NO.29 Which two items describe the information that you can find in the Custom Validation Report?

A list of all manually created validations across all applications

The actions and properties that trigger the validation check

A list of system and application-specific validations

The date and status of the last time a validation was run

NO.30 For which application type can you NOT export mappings?

Planning

Universal

Financial Consolidation and Close

Financials Cloud General Ledger

Oracle E-Business Suite General Ledger

NO.31 You want to map two general ledger systems, GL1 and GL2, to a single EPM Planning application. It is time to synchronize changes by exporting the plan account mappings. Which statement about mapping keys is true?

You need only one mapping key and location to export the plan account mappings.

You need two mapping keys, one for GLl-to-Planning and one for GL2-to-Planning. When you export a mapping, you select the location with its associated mapping key.

You create shadow mapping keys in the target application to represent the values coming from GL1 and GL2, respectively.

You create one location per mapping key, where a mapping key is a unique source-target combination.

NO.32 At the end of the registration process, each dimension generates a data chain, which is a group of data objects within the information model.
Which statement is FALSE regarding the data chain object?

You can define your own hierarchy sets when you want to create alternate hierarchies using different relationships between the same or different node types.

Node types manage nodes and properties.

A hierarchy uses all the data chain objects.

Node sets define the group of nodes available in viewpoints.

Views are a collection of node sets and hierarchy sets.

A viewpoint is the interface you use to display and edit information, and work with data.

NO.33 You have entity information in your default view for your planning application, but you also want that entity information to be accessible in another view.
Which method can you use to accomplish this?

Identify the view used by the entity dimension, create a different view, and then point to the default view.

Identify the node set used by the entity dimension, create a viewpoint in a different view, and then point to that same node set.

Copy the default view, create a request, and run a validation.

Identify the viewpoint used by the entity dimension, create a viewpoint in a different view, and then point to the original viewpoint.

NO.34 Which statement is FALSE about unbound dimensions?

Unbound dimensions are created as part of the application registration process, but do not get imported or exported.

You can extract data from unbound dimensions using extracts.

You can load data into unbound dimension viewpoints by using request load files.

You can use unbound dimensions to manage complex data sets such as related value sets, account combinations, and multi-dimensional mappings.

NO.35 Which three tasks can you automate with EPM Automate?

Archive backups

Import and export dimensions

Create and auto-submit change requests

Recreate service

Export and import snapshots

NO.36 Which two statements are true about mapping keys?

Mapping keys consist of a location, source node type, and target node type.

The system automatically generates mapping keys for each unique location.

Mapping keys control which dimensions are output in the source and target columns of the mapping export.

One mapping key is required per location.

NO.37 The Owner permission for an application lets users perform which three tasks?

Modify application registration.

Assign permissions for an application’s data objects to other users and groups.

Import viewpoints from external applications.

Manage an application’s data objects.

Delete service administrators from an instance.

NO.38 In a list viewpoint, what are the related data chain objects?

Node type, node set, dimension

Node type, hierarchy set, node set, properties

Node type, node set

Node type, node set, properties

Node type, hierarchy set, node set

NO.39 After submitting a request for approval, you discover that you need to make additional changes to it. What two options do you have?

Create a second request with the additional changes, and submit it for separate approval.

Recall the request and delete it. Create a new request with all of the required changes and submit it for approval.

Push the request back to the submit stage, add the changes, then submit it again for approval.

Recall the request, add the changes, then submit it again for approval.

NO.40 Which EPM Automate command can you use to restart services on your instance?

restartService

recreateService

startService

resetService

NO.41 A request you submitted has been pushed back to you. One of the approvers has enriched the request with an action that your data access does not enable you to perform.
What happens when you submit the request again?

The enriched item creates a validation error and must be deleted from the request inspector before you can submit the request for approval.

All items in the request are validated using your data access except the enriched item, which is validated during the approval phase using the enricher’s data access.

The enriched item is validated using the enricher’s data access ancTtan be submitted along with the rest of the request.

The enriched item creates a validation error but can still be submitted with the rest of the request for approval.

NO.42 Consider a hierarchy: A parent node, “Core Products”, has a child node “100”, which has children “101” and
“102”. In the same hierarchy, you insert “100” under another parent, “New Products”.
What happens?

Node “100” and its children are inserted as shared nodes under “New Products”.

Node “100” cannot be inserted under another parent in the same hierarchy.

Node “100” is inserted as a unique node under “New Products”, with a qualifier to indicate that it’s a separate node from the original.

Only node “100” is inserted as a shared node under “New Products”.

NO.43 Which task is NOT part of the Enterprise Data Management process?

Creating ad-hoc reports to inspect node locations, properties, and history

Using views to work with your data, and requests to modify your data

Creating views and viewpoints to manage alternate business perspectives

Sharing, mapping, synchronizing, and governing data across registered applications

Creating views and viewpoints to configure custom validations to enforce business rules on your data

NO.44 Which three tasks can be performed by a user with the Data Manager permission on an application?

Manage the application’s node sets, hierarchy sets, and node types.

Import, export, and update data for all dimensions in the application.

Create and submit requests for dimensions in the application.

Manage viewpoints and viewpoint subscriptions for all dimensions in the application.

Assign permissions for the application data.

NO.45 When you register an application, the system creates a default view that contains all your dimensions. However, there may be situations where the default view is not enough and you need to create an alternate view and viewpoints.
Which three are situations where you create an alternate view and viewpoints?

You need to create a validation view with multiple viewpoints from different dimensions so you can maintain all your application information in one place.

You need to create a view to give users access to a limited set of data.

You need to create a maintenance view with multiple viewpoints from different applications so you can maintain all your dimension information in one place.

You need an alternate view to share, compare, and map information across multiple applications.

You need to give users access to the default view so that they have access to only one dimension.

NO.46 In a list viewpoint, what are the related data chain objects?

Node type, node set, dimension

Node type, hierarchy set, node set, properties

Node type, node set

Node type, node set, properties

Node type, hierarchy set, node set

NO.47 A subscription is triggered by changes in a source viewpoint. One item in the subscription request is invalid and auto-submit is enabled.
What happens next?

All request items except the invalid item are automatically committed to the target viewpoint, and the subscription assignee is notified that an issue must be resolved for the outstanding item.

All request items are automatically committed to the target viewpoint, and the subscription assignee is notified.

The request is automatically rejected, and the subscription assignee is notified of the rejection.

No request items are committed to the target viewpoint, and the subscription assignee is notified that an issue must be resolved before any items can be committed.

NO.48 You need nodes added to your General Ledger application’s account dimension to be shared to your Planning application’s account dimension.
Which two steps can you take to facilitate this?

Link the account dimension in the General Ledger application to the account dimension in the Planning application.

Create a node type converter for the Account node type in the Planning application that uses the General Ledger Account node type as a source.

Create a maintenance view with viewpoints for both the General Ledger account dimension and the Planning account dimension.

Create a node type converter for the Account node type in the General Ledger application that uses the Planning Account node type as a source.

The Oracle 1z0-1086-22 exam consists of 60 questions, and the candidate has 105 minutes to complete it. The questions are in multiple-choice format, and the passing score is 70%. 1z0-1086-22 exam is available in English and Japanese, and it can be taken at any Pearson VUE testing center worldwide. Candidates can prepare for the exam by taking Oracle’s recommended training course, which covers all the topics tested in the exam.

Oracle 1z0-1086-22 exam is intended for professionals who want to become proficient in implementing Oracle Enterprise Data Management Cloud 2022. Oracle Enterprise Data Management Cloud 2022 Implementation Professional certification exam is designed to test the candidate’s knowledge and skills in various aspects of Oracle Enterprise Data Management Cloud, including its architecture, configuration, and administration. Professionals who pass 1z0-1086-22 exam demonstrate their expertise in implementing and managing Oracle Enterprise Data Management Cloud solutions in their organizations.

Pass Your Enterprise Data Management 1z0-1086-22 Exam on Sep 03, 2023 with 60 Questions: https://www.real4prep.com/1z0-1086-22-exam.html