Check Real Cisco 300-410 Exam Question for Free (2025) [Q159-Q181]

4/5 - (2 Stimmen)

Check Real Cisco 300-410 Exam Question for Free (2025)

Get Ready to Boost your Prepare for your 300-410 Exam with 630 Questions

Details of Cisco 300-410 Exam

Cisco 300-410 is a 90-minute exam, and the applicants are required to answer about 65 questions during this allocated time. These items can be presented in different formats, including multiple choice, testlets, drag and drop, or fill-in-the-blank. To earn the certification, the candidates have to gain the passing score of a minimum of 750 points on a scale of 1000. Please keep in mind that this test can be only taken in the Japanese and English languages. Also, the learners must pay the fee of $300. This payment allows them to register and schedule the exam through the Pearson VUE platform. After that, the students can choose the proper way of the delivery of this test. If you want to sit for this exam at the testing center, you can choose an in-person variant. On the other hand, you can opt for the online testing that will give you an opportunity to take the exam from any place at any time. Those individuals who do not achieve the pass mark will be asked to retake the 300-410 ENARSI test.

To prepare for the Cisco 300-410 exam, candidates are advised to have a solid understanding of networking fundamentals and a strong knowledge of the topics covered in the exam. They can also take advantage of Cisco’s training and certification resources, such as online courses, study guides, and practice exams, to help them prepare effectively for the test. Passing the Cisco 300-410 exam is a significant achievement and can help professionals advance their careers in the field of network engineering and design.

NO.159 Refer to the exhibit. An engineer configured SNMP traps to record spoofed packets drop of more than 48000 a minute on the ethernet0/0 interlace. During an IP spoofing attack, the engineer noticed that no notifications have been received by the SNMP server.
Which configuration resolves the issue on R1?

ip verity unicast notification threshold 48000

ip verify unicast notification threshold 8000

ip verify unicast notification threshold 800

ip verify unicast notification threshold 80

NO.160

Refer to the exhibit. An engineer is troubleshooting a prefix advertisement issue from R3, which is not directly connected to R1. Which configuration resolves the issue?

NO.161 Refer to the exhibit.

A junior engineer updated a branch router configuration. Immediately after the change, the engineer receives calls from the help desk that branch personnel cannot reach any network destinations. Which configuration restores service and continues to block 10.1.1.100/32?

route-map FILTER-IN deny 5

ip prefix-list 102 seq 15 permit 0.0.0.0/32 le 32

ip prefix-list 102 seq 5 permit 0.0.0.0/32 le 32

route-map FILTER-IN permit 20

Erläuterung
By using “deny” keyword in a route-map, we can filter out the prefix specified in the prefix-list.
But there is an implicit “deny all” statement in the prefix-list so we must permit other prefixes with “permit” keyword in the route-map.

NO.162 Refer to the exhibit.

A client is concerned that passwords are visible when running this show archive log config all.
Which router configuration is needed to resolve this issue?

MASS-RTR(config-archive-log-cfg)#password encryption aes

MASS-RTR(config)#aaa authentication arap

MASS-RTR(config)#service password-encryption

MASS-RTR(config-archive-log-cfg)#hidekeys

Erläuterung

NO.163 Refer to the exhibit.

An IT staff member comes into the office during normal office hours and cannot access devices through SSH Which action should be taken to resolve this issue?

Modify the access list to use the correct IP address.

Configure the correct time range.

Modify the access list to correct the subnet mask

Configure the access list in the outbound direction.

To ACL should be permit tcp 101 10.1.1.1 0.0.0.0

NO.164 Refer to the exhibit.

An engineer is monitoring reachability of the configured default routes to ISP1 and ISP2. The default route from ISP1 is preferred if available. How is this issue resolved?

Use the icmp-echo command to track both default routes

Use the same AD for both default routes

Start IP SLA by matching numbers for track and ip sla commands

Start IP SLA by defining frequency and scheduling it

Referenz:
https://www.cisco.com/c/en/us/support/docs/ip/ip-routing/200785-ISP-Failover-with-default-routes-using-I.html

NO.165 Drag and drop the packet from the left onto the correct descriptions on the right.

Erläuterung
Data plane packets = User-generated packets that are always forwarded by network devices to other end-station devices Control plane packets – Network device generated or received packets that are used for the creation and operation of the network itself.
Management plane packets – Network device generated or received packets, or management station generated or received packets that are used to manage/operate the network Services plane packets = user generated packets that are forwarded by network devices to other end station devices, but that require higher priority than the normal traffic by the network devices.
https://tools.cisco.com/security/center/resources/copp_best_practices

NO.166 Refer to the exhibit.

Which two actions should be taken to access the server? (Choose two.)

Modify the access list to add a second line of permit ip any

Modify the access list to deny the route to 192.168.2.2.

Modify distribute list seq 10 to permit the route to 192.168.2.2.

Add a sequence 20 in the route map to permit access list 1.

Add a floating static route to reach to 192.168.2.2 with administrative distance higher than OSPF

NO.167 Refer to the exhibit.

An engineer must establish multipoint GRE tunnels between hub router R6 and branch routers R1, R2, and R3. Which configuration accomplishes this task on R1?

We have an example of how to configure DMVPN Phase II and we show the configuration here for your reference:
Diagram Description automatically generated

DMVPN Phase II – Dynamic Mapping
Text Description automatically generated

Note: Although Phase II – Dynamic Mapping is “dynamic” but we still need to add a static entry for the hub because without that entry, the NHRP registration cannot be sent.

NO.168 Refer to the exhibit.

An engineer must configure PBR on R1 to reach to 10.2.2.0/24 via R3 AS64513 as the primary path and a backup route through default route via R2 AS64513. All BGP routes are in the routing table of R1. but a static default route overrides BGP routes. Which PBR configuration achieves the objective?

Option A

Option B

Option C

Option D

NO.169 Refer to the exhibit.

An engineer has configured DMVPN on a spoke router. What is the WAN IP address of another spoke router within the DMVPN network?

172.18.46.2

192.168.1.4

172.18.16.2

192.168.1.1

NO.170 Refer to the exhibit.

Why is user authentication being rejected?

The TACACS+ server expects “user”, but the NT client sends “domain/user”.

The TACACS+ server refuses the user because the user is set up for CHAP.

The TACACS+ server is down, and the user is in the local database.

The TACACS+ server is down, and the user is not in the local database.

Reference: https://www.cisco.com/c/en/us/support/docs/security-vpn/terminal-access-controller-accesscontrol- system-tacacs-/13864-tacacs-pppdebug.html

NO.171

Refer to the exhibit. R10 attempts to copy an image file from R11 using TFTP, and the operation is timing out. Which action resolves the issue?

Change R10 duplex to auto to resolve the duplex mismatch between routers R10 and R11.

R10 must be configured to belong to the same VRF TFTP.

R11 requires the TFTP server source-interface to be set to GigabitEthernetO/0.

R11 requires the TFTP server command for the image to be set to the VRF TFTP.

NO.172 Which configuration adds an IPv4 interface to an OSPFv3 process in OSPFv3 address family configuration?

router ospfv3 1
address-family ipv4

Router(config-router)#ospfv3 1 ipv4 area 0

Router(config-if)#ospfv3 1 ipv4 area 0

router ospfv3 1
address-family ipv4 unicast

Referenz:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_ospf/configuration/xe-3s/iro-xe-3s-book/ip6-route-ospfv3-add-fam-xe.html

NO.173 Drag and drop the SNMP attributes in Cisco IOS devices from the left onto the correct SNMPv2c or SNMPV3 categories on the right.

NO.174 Refer to Exhibit.

The network administrator configured the branch router for IPv6 on the E0/0 interface. The neighboring router is fully configured to meet requirements, but the neighbor relationship is not coming up. Which action fixes the problem on the branch router to bring the IPv6 neighbors up?

Enable the IPv4 address family under the router ospfv3 4 process by using the address-family ipv4 unicast command

Disable IPv6 on the E0/0 interface using the no ipv6 enable command

Enable the IPv4 address family under the E0/0 interface by using the address-family ipv4 unicast command

Disable OSPF for IPv4 using the no ospfv3 4 area 0 ipv4 command under the E0/0 interface

Once again, Cisco changed the IOS configuration commands required for OSPFv3 configuration. The new OSPFv3 configuration uses the “ospfv3” keyword instead of the earlier “ipv6 router ospf” routing process command and “ipv6 ospf” interface commands.
The Open Shortest Path First version 3 (OSPFv3) address families feature enables both IPv4 and IPv6 unicast traffic to be supported. With this feature, users may have two processes per interface, but only one process per address family (AF).

NO.175 Refer to the exhibit.

Which set of commands restore reachability to loopback0?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

NO.176 Refer to the exhibit.

Which interface configuration must be configured on the spoke A router to enable a dynamic DMVPN tunnel with the spoke B router?

Option A

Option B

Option C

Option D

Erläuterung
The command ip nhrp map multicast dynamic should be only used on Hub router, not spoke. If we are running dynamic routing protocols based on multicast (like RIP, OSPF, EIGRP …) we have to add the command ip nhrp map multicast dynamic in Hub to replicate all multicast traffic to all dynamic entries in the NHRP table (multicast will be proceeded as unicast traffic) – The tunnel source FastEthernet0/0 is equivalent to tunnel source 172.17.0.2, which is the NBMA address of Spoke A.

NO.177 Refer to the exhibit. The R1 routing table has the prefixes for the FTP1 and FTP2 file servers. A network engineer must configure the R1 with these requirements:
– Host1 must use the FTP1 fileserver.
– Host2 must use the FTP2 fileserver.
Which configuration meets the requirement on R1?

NO.178 Refer to the exhibit.

Which configuration enables OSPF for area 0 interfaces to adjacency with a neighboring router with the same VRF?

router ospf 1 vrf CCNPinterface Ethernet1ip ospf 1 area 0.0.0.0interface Ethernet2ip ospf 1 area 0.0.0.0

router ospf 1interface Ethernet1ip ospf 1 area 0.0.0.0interface Ethernet2ip ospf 1 area 0.0.0.0

router ospf 1 vrf CCNPnetwork 10.1.1.1 0.0.0.0 area 0network 10.2.2.2 0.0.0.0 area 0

router ospf 1 vrf CCNPnetwork 10.0.0.0 0.0.255.255 area 0

NO.179 Refer to the exhibit. A client is concerned that passwords are visible when running this show archive log config all.

Which router configuration is needed to resolve this issue?

MASS-RTR(config-archive-log-cfg)#hidekeys

MASS-RTR(config-archive-log-cfg)#password encryption aes

MASS-RTR(config)#service password-encryption

MASS-RTR(config)#aaa authentication arap

NO.180 Refer to the exhibit.

A loop occurs between R1, R2, and R3 while EIGRP is run with poison reverse enabled. Which action prevents the loop between R1, R2, and R3?