CT-TAE Exam Info and Free Practice Test Professional Quiz Study Materials [Q23-Q40]

5/5 - (1 vote)

CT-TAE Exam Info and Free Practice Test Professional Quiz Study Materials

Accurate Hot Selling CT-TAE Exam Dumps 2023 Newly Released

Q23. Consider A TAS for testing a desktop application via its GUI. All the test cases of the automated test suite contain the same identical sequences of steps at the beginning (to create the necessary objects when doing a preliminary configuration of the test environment and at the end (to remove everything created -specifically for the test itself during the preliminary configuration of the test environment). All automated test cases use the same set of assertion functions from a shared library, for verifying the values in the GUI fields ( e.g text boxes).
What is the BEST recommendation for improving the TAS?

Implementing keywords with higher level of granularity

Improving the architecture of the application in order to improve its testability

Adopting a set of standard verification methods for use by all automated tests

Implementing standard setup and teardown functions at test case level

Q24. A regression test suite consist of 500 test cases which are all executed manually. The business case for a pilot project is based on the adoption of test automation using a commercial tool that will reduce the execution time by a factor of 90% for 100% of the tests in the regression test suite. The pilot project lasted one month ( as planned) and you are currently its results. At the end of the pilot project, 40% of the regression tests have been automated and their execution time has been reduce by 60%.
Which of the following statements is TRUE in this scenario?

The duration of the pilot project was too short -it should last unit the success factors are achieved

The target defined for the business case is too accurate -it should not be measureable

The project selected for the pilot is too critical -if should not be too critical or too trivial

The target defined for the business case seems difficult to hit – it should be realistic

Q25. Which of the following success factors for a test automation project is TRUE?

Automated tests must be designed to capture only the data that is strictly needed for comparing expected and actual results

The test cases to be automated first must always be selected based on the number of times a test will need to be run

The test cases to be automated must have a high dependency on particular data values

Automated tests that fail due to changes in the requirements of the SUT should be promptly fixed rather than disabled from the test suite

Q26. Which of the following BEST describes why it is important to separate test definition from test execution in a TAA?

It allows developing steps of the test process without being closely tied to the SUT interface.

It allow choosing different paradigms (e.g event-driven) for the interaction TAS and SUT

It allows specify test cases without being closely tied to the tool to run them against the SUT

It allows testers to find more defects on the SUT

Q27. When if the BEST time for automation to consider legal and/or standard requirements for a SUT?

When implementing the SUT

When designing a TAF

When designing a TAA

When developing a TAS

Q28. You are working on a web-based application called Book Vault that allows people to upload books and order books. This application must be available on all major browsers.
You have been testing the application manually and management have asked you to consider automating some of the tests.
You have investigated a number of commercial and free tools which can automate tests at a web browser level and one tool in particular meets your requirements and you have implemented a trial version.
You have basic programming skills and the main goal is to automate a few functional tests to see if the tool is compatible with the application and can recognise the objects and controls.
Which scripting technique would be MOST suitable in this scenario in order to meet the objectives?

Structured scripting

Capture-replay scripting

Data-driven scripting

Model-based scripting

Q29. Consider the following layers of the gTAA structure:
a. Test generation layer
b. Test definition layer
c. Test execution layer
d. Test execution layer
Consider the following capabilities associated with these layers.
Acquire all the necessary resources before each test and release all after run, in order to avoid interdependences between test Allow the automated test scripts on an abstract level to interact with components, configurations and interfaces of the SUT.
Design test directives that allow configuring the algorithms used to automatically produce the test cases a given model of the SUT.
Allow the definition and implementation of test cases and data by means of templates and/or guidelines.
Which of the following BEST matches each layer with the appropriate capability?

a-3, b-4, c-1, d-2

a-4, b-3, c-1, d-2

a-4, b-3, c-2, d-1

a-3, b-4, c-2, d-1

Q30. A defect in a SUT has been resolved and validated by an automated defect re-test in the current release of the software. This retest has now been added to the automated regression test suite.
Which statement BEST describes a reason why this defect could re-occur in future releases?

Automated defect confirmation testing is not effective at confirming that the resolved defect will continue to work in future releases

The configuration management process does not properly control the synchronization between software archives

The automated regression test suite is not run consistently for future releases.

The automated regression test suite has a narrower scope of functionality

Q31. Which of the following is considered a disadvantage of test automation?

Automated exploratory testing is difficult to implement

Test automation can be a distraction from the objective of finding bugs

Tests are more likely to have operator errors.

Slower feedback on the quality of the system.

Q32. If model-based testing has been selected for the overall test automation approach for a project, how does that influence the layers of the TAA?

All layers are used, but the test generation layer will be automated based on the defined model

There will be no need for the execution layer

No adaptation will be needed because the interfaces will be defined by the model

There will be no need to design the tests for the API because those will be covered by the model

Q33. A web application was released into production one year ago, it has regular release which follow a V-model lifecycle and testing is well-established and fully integration into the development lifecycle. You have been asked to implement a TAS for the regression test suite. The regression tests have been developed via the GUI and are expected to be run at least four times a month, for each planned release, for the whole operation solution life of the system (six years). Each screen of the GUI uses several third-party controls which are not compatible with the existing automation solutions. The environment for the automation will be stable, fully controllable and separated from other environments (development, staging, production).
What could be the MOST problematic for this TAS?

Maturity of the test process

Complexity to automate

Frequency of use

Sustainability of the automated environment

Q34. You are implementing test automation for a project and you want to be able to generate test cases automatically using a series of test design tools which use a variety of test design techniques such as decision tables, pairwise testing and boundary value analysis.
You also want to generate test data automatically which can then be used by the tests.
Initially these tests will be run manually to verify their correctness and ultimately you want to include them in the test execution tool so that they can run unattended.
Which layer of the gTAA will be used to support the specification of the test cases and preparation of the test data?

The generation layer

The definition layer

The execution layer

The adaptation layer

Q35. Consider a TAS deployed into production. The SUT is a web application and the test suite consists of a set of automated regression tests developed via GUI. A keyword-driven framework has been adopted for automating the regression tests. The tests are based on identification at low-levels of the web page components (e.g class indexes, tab sequence indexes and coordinates) in the next planned release the SUT will be subject to significant corrective maintenance (bug-fixes) and evolution (new features) Maintenance costs to update the test scripts should be as low as possible and the scripts must be highly reusable.
Which of the following statements is most likely to be TRUE?

The keyword-driven framework is not suitable, it would be better to adopt a structured-scripting approach

False positive errors are likely to occur when running the automated tests on the new releases without modifying the test

The total execution time of the automated regression test suite will decrease for each planned release.

The keyword-driven framework introduces a level abstraction that is too high and makes it difficult what really happens

Q36. Consider a SUT that small run on multiple platform during the execution of automated test runs. In each test run an automated test suite needs to be executed, with the same version of the TAF, against the same version of the SUT of each platform. Each platform shall have its own dedicated test environment. Your goal is to implement a process as automated as possible ( i.e with minimal manual intervention) that allows implementing a consistent setup of the TAS across the multiple test environments.
Which two of the following aspects are MOST relevant for achieving your goal in this scenario?
The configuration of the TAS uses automated installation scripts
The TAF saves the logs needed to debug errors in XML format
C) Features of the TAF not used by the automated tests have been tested D) All the automated test cases contain the expected results E) The TAS components are under configuration management

A and e

B and c

B and d

A and d

Q37. You are reviewing the testability of your SUT.
Which of the following BEST refers to the characteristic of OBSERVABILITY?

The ability of the SUT to perform its intended function for a specified period of time

The ability to exercise the SUT by entering inputs, triggering events and invoking methods

The ability of the SUT to prevent unauthorized access to its components or data.

The ability to identify states, outputs, intermediate result and error messages in the SUT

Q38. You are working on a TAS for standalone application. The automated tests are developed based on a automation framework that allows interaction with GUI elements using on object orientated API. The GUI elements include menus, buttons, radio buttons, text toolbars and their properties.
Whilst automating a test, you have discovered that the GUI elements of some third party components are not identifiable by the automated tool you are using.
Which of the following is the FIRST step that you take to investigate this issue?

Verify the testability support with the providers of the third party components

Verify whether the GUI identification depends on the browser.

Adopt an approach that uses the coordinates of the GUI elements instead

Verify whether naming standards for variables and have been defined for the current automation solution

Q39. Which of the following describes how a test execution report is likely to be used?

To understand which test step caused the failure in a test case

To identify problematic areas of the SUT by keeping a history showing which test cases fail the most

To measure coverage of the test basis by a test suite

To record how a test case failure has been fixed

Q40. You have been asked to determine a TAS for a new release of a SUT, test should be automated wherever. The new release will consist of 5 new interfaces and an amendment to 3 existing interfaces. The new and amended interface will be deliver incrementally in 3 sprints, each lasting 2 weeks.
What would be the BEST Test Automation Solution (TAS) design in this scenario?

Automate tests at both Component and System Level. Only do this automation once every interface has been fully developed or amended and manual testing has completed successfully.

Automate tests at one level only, System level. Use only the newly developed interfaces and do not create any customized interfaces/test hooks.

Automate the tests at two levels, Component and System level. Create customized hooks at Component level for interface not yet developed or amended. Only use the newly developed or amended interfaces to test at System level.

Automate a test at once level, component level, Create customized interface/test hooks for this level where the interface has not yet been developed or amended.