[Feb 25, 2026] Updates Up to 365 days On Valid INSTC_V8 Braindumps [Q97-Q118]

5/5 - (1 vote)

[Feb 25, 2026] Updates Up to 365 days On Valid INSTC_V8 Braindumps

Best QualityINSTC_V8 Exam Questions BICSI Test To Gain Brilliante Result

NO.97 A category 8 cable is terminated into category 6A outlets with category 5e patch cords. What is the maximum supported performance level?

Category 5e

Category 6A

Category 7

Category 8

NO.98 Which tool is required to pull backbone cable of significant weight?

Pull string

Furcating harness

Pulling eye

Tugger

NO.99 Which of the following terms describes the unwanted signal coupling from a disturbing pair of a 4-pair cable channel to a disturbed pair of another 4-pair channel?

NEXT – Near end crosstalk

ACRF – attenuation to crosstalk ratio far end

AXT – alien crosstalk

NO.100 What method of transmission is used to transmit signals during a telephone call?

Simplex

Half-duplex

Full duplex

NO.101 Which of the following refers to a set of rules issued by a governmental body at the state level within the US?

Regulations

Best Practices

Applications

Guidelines

NO.102 Unqualified workers must stay AT LEAST ____ from exposed energized conductors operating at 300 to
50,000 V.

0.3 m (1′)

3 m (10′)

15 m (50″)

30 m (100′)

NO.103 The information transmitted by an ICT system can originate in two fundamental forms:

Synchronous and asynchronous

Light and sound

Progressive and regressive

Analog and digital

NO.104 Which of the Two organizations jointly oversee the worldwide standardization of telecommunications cabling?

Alliance for Telecommunications Industry Solutions (ATIS) and Society for Cable Telecommunications Engineers (SCTE)

National Electrical Contractors Association (NECA) and National Fire Protection Association (NFPA)

Comite Europeen de Normalisation Electrotechnique (CENELEC) and Electronic Industries Association (EIA)

International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC)

NO.105 Which of the following attachment methods does BICSI recommend for attaching coaxial connectors to coaxial cable?

Screw-on

Push-on

Compression

Crimp

NO.106 How much sheath of the cable needs to be removed in order to properly terminate an 8P8C?

6.3mm (0.25″)

12.7mm (0.5″)

25mm (1″)

38 mm (1.5″)

NO.107 Which statement is TRUE about support systems for horizontal cabling according to BICSI and TIA/EIA standards?

J-hooks are generally prohibited except in buildings over four stories.

Cable supports must be placed at intervals not exceeding 1.5 m (5 ft).

Lashing cables to electrical conduits is acceptable in open ceilings.

The support system must integrate with the building’s water piping.

NO.108 What is the maximum pull force for four-strand optical fiber?

222N (50 lbf)

330 N (75lbf)

880 N (200 lbf)

NO.109 During a retrofit, an installation crew discovers old insulation that they think may contain asbestos, they cannot complete their work without disturbing the insulation. What is the best course of action for the crew to take?

Remove the asbestos-containing substance

Monitor the air quality while they work

Wear breathing protection during the task

Stop work immediately

NO.110 You are installing a new equipment rack in a Telecommunications Room (TR). Which grounding practice aligns BEST with BICSI Installer 2 guidelines?

Connecting the rack directly to the nearest water pipe for grounding

Grounding the rack to the building’s structural steel using a #8 AWG copper conductor

Bonding the rack to the telecommunications grounding busbar with a listed bonding conductor of appropriate size

Relying on the rack’s anchor bolts into the concrete floor for grounding

NO.111 Which of the following fire ratings refers to the time period that the unexposed surface of a firestop assembly does not exceed 180 degrees C (325 degrees F) above its initial temperature?

E rating

FT rating

FH rating

S rating

NO.112 In a multi-story building, the Telecommunications Main Grounding Busbar (TMGB) is typically located
_______.

on the top floor for easier bonding to rooftop antennas

in or near the main electrical service entrance

distributed in each tenant space for convenience

midway through the building for balanced potential

NO.113 When bonding a shielded twisted-pair cable system, which of the following must be ensured to comply with proper grounding and bonding practices?

Only the outer jacket is stripped back to expose the shield at the connector

The cable shield is bonded to a non-conductive anchor to prevent ground loops

The drain wire or shield foil is securely bonded to the connecting hardware or patch panel that is connected to the TGB/TMGB

The shield is folded back outside of the connector for easy visual inspection

NO.114 According to BICSI, the maximum recommended separation in a communications space between fiber-optic splice points and high-voltage electrical equipment (600 V or more) is:

0.3 m (1 ft)

1.0 m (3.3 ft)

1.5 m (5 ft)

3.0 m (10 ft)

NO.115 A third 90-degree bend may be permitted in a conduit run if the run does NOT exceed ______?

5 m (16.5′)

10 m (33′)

15 m (50′)

30 m (100′)

NO.116 Which of the following is used to establish a 0 volt (V) reference for ac electrical power systems?

Alternating current (AC) grounding electrode system

Telecommunication bonding infrastructure