100% Updated EMC D-PST-DY-23 Enterprise PDF Dumps [Q18-Q39]

Rate this post

100% Updated EMC D-PST-DY-23 Enterprise PDF Dumps

Use Valid Exam D-PST-DY-23 by Real4Prep Books For Free Website

EMC D-PST-DY-23 exam is designed for professionals who have a good understanding of data center operations, storage area networks (SAN), and Server Virtualization. D-PST-DY-23 exam tests the candidates’ ability to perform the installation, configuration, and management of clustered Dell PowerStore systems using best practices. Other skills required for the exam include the deployment of Dell PowerStore solutions in multi-vendor environments and configuring the Dell PowerStore for Fibre Channel, iSCSI, and NFS/SMB protocols.

QUESTION 18
What is the correct command to verify a Linux host is using native multipath MPIO?

multipath -n

multipath -m

multipath -l

multipath -p

QUESTION 19
What describes the process used in the Import External Storage migration architecture?

Orchestrator on PowerStore communicates over the control path to the host plugin and controls the multipathing active path to storage

Plugin on PowerStore communicates over the control path to orchestrator on the host and controls the multipathing active path to storage

Orchestrator on PowerStore communicates over the data path to the host plugin and controls the multipathing active path to storage

Plugin on PowerStore communicates over the data path to orchestrator on the host and controls the multipathing active path to storage

QUESTION 20
Place the steps in order for configuring source and destination vCenters when setting up a vVol replication with SRM.

1 – Policy structure – select Enable rules for “Dell EMC PowerStore” storage.
2 – select snapshot protection rule Snap
3 – select replication protection rule vVol
4 – Storage compatibility – verify that the vVol-PowerStore-A container is displayed.

QUESTION 21
SIMULATION
create an SMB NAS server in the PowerStore simulator using the provided information.
Here’s the information that is given:
NAS and SMB computer name: payrollserver
Network Interface: BaseEnclosure-bond1
IP address: 192.168.2.20
Subnet: /24
Gateway: 192.168.2.254
VLAN: 1504
AD/DNS: 192.168.2.50
Windows domain name: company.com
Domain administrator credentials: (presumably Administrator/password)

See explanation below
Explanation:
1. Navigate to NAS Servers
Go to Compute > NAS Servers.
Click Add NAS Server.
2. Configure NAS Server Settings
NAS Server Name: Enter payrollserver.
Network Interface: Select BaseEnclosure-bond1.
IP Address: Enter 192.168.2.20.
Subnet: Enter /24.
Gateway: Enter 192.168.2.254.
VLAN: Enter 1504.
AD/DNS: Enter 192.168.2.50.
Windows domain name: Enter company.com.
Domain administrator credentials: Enter Administrator for the username and password for the password.
3. Add the NAS Server
Click Add.
Verification
After the NAS server is created, you can verify its configuration on the NAS Servers page. Check that all the settings are correct.
Key Considerations
Network Connectivity: Ensure that the network interface (BaseEnclosure-bond1) is properly configured and connected to the network with the specified VLAN.
Active Directory Integration: The provided domain administrator credentials will be used to join the NAS server to the Active Directory domain. Make sure these credentials are valid.
DNS Resolution: The AD/DNS server IP address (192.168.2.50) should be reachable from the PowerStore appliance for proper name resolution.
By following these steps, you’ll successfully create an SMB NAS server with the specified configuration in the PowerStore simulator.

QUESTION 22
Which three features are included in PowerStore X licensing? (Choose three.)

vSphere

Metro node

[Migration

Replication

Snapshots

QUESTION 23
Which three file replication operations are available in PowerStore Manager? (Select 3)

Reverse

Reprotect

Planned Failover

Resynchronize

Reprotect and Reverse

QUESTION 24
A storage administrator has configured a VNX2 as a remote system.
Which Import External Storage migration architectural components are now established?

Data path and management control path to the access host.

Data path and management control path to the source storage system.

Host iSCSI initiators are registered on the VNX2 storage system.

Host Fibre Channel initiators are deregistered on the VNX2 storage system.

Topic 1,
SIMULATION / Lab Based Questions

QUESTION 25
DRAG DROP Place the steps in the correct order to map a PowerStore volume to a NVMe host.

QUESTION 26
After running an assisted migration PowerStore continues to generate alerts regarding space optimization on one of the four appliances.
What needs to be done to free more space on the affected appliance?

Add more hard drives

Run Assisted Migration again

Manual remediation

Add another appliance

QUESTION 27
What parameter is commonly defined in a protection policy for virtual machines created on vVols?

CPU utilization limits

Storage tiering configuration

Network bandwidth allocation

Backup frequency and retention

QUESTION 28
To prevent connectivity alerts how should the 4 front end ports be connected?

All ports from Node A to the one switch, all ports from Node B to the other switch

Connecting ports 2 and 3 from Node A to ports 2 and 3 of Node B

Alternating connections to 2 data switches from each node

All ports from both Nodes to one data switch

QUESTION 29
Which configuration item is optional during the PowerStore ICW?

Support and CloudlQ

Default Users

Management Network

Fault Tolerance

Core service components that are required to be initialized are Telemetry Notice, Cluster Details, Default Users, Fault Tolerance, Management Network, Infrastructure Services, and Create Cluster. As a result of successful core initialization steps, a cluster is created, but not fully configured. (P59 of POWERSTORE 3.0 POWERSTORE T IMPLEMENTATION)

QUESTION 30
A PowerStore T administrator is tasked to replicate two production volumes to a DR cluster. The expected latency between the source and target cluster is 9ms.
How should the network latency be set while creating the remote system connection using PowerStore manager?

Custom

Low

High

Medium

QUESTION 31
What is the final configuration step when installing the ImportKit for a Windows host accessing VNX2 storage?

Select the folder location on the host for the program installation

Select the RSA key for configuring the control path HTTPS certificate

Configure the network port and interface for the host data path

Configure the network port and interface for the management control path

QUESTION 32
What are the correct steps to manually install a PowerStore license?

1. Export Activation file and visit Dell EMC Software Licensing Central
2. Upload the license key file to activate PowerStore license
3. Click Install License option under Settings in GUI
4. Upload Activation file
5. Retrieve the License key file

1. Upload Activation file
2. Click Install License option under Settings in GUI
3. Upload the license key file to activate PowerStore license
4. Export Activation file and visit Dell EMC Software Licensing Central
5. Retrieve the License key file

1. Upload Activation file
2. Click Install License option under Settings in GUI
3. Upload the license key file to activate PowerStore license
4. Retrieve the License key file
5. Export Activation file and visit Dell EMC Software Licensing Central

1. Retrieve the License key file.
2. Click the “Install License” option under “Settings” in the user interface.
3. Upload the Activation file.
4. Upload the license key file to activate the PowerStore license.
5. Export Activation file and go to Dell Software Licensing Central.

QUESTION 33
In the context of PowerStore, what does the term “AppsON” refer to?

Native mobile applications

Virtualized applications running directly on the storage array

PowerStore’s app store

Application optimization software

QUESTION 34
What are two minimum requirements for using VMware Site Recovery Manager (SRM) with PowerStore? (Choose two.)

VMware SRM version 8.3 and newer

VMware SRM version 8.0 and newer

VMware vCenter Server and ESXi hosts version 6.5 and newer

VMware vCenter Server and ESXi hosts version 6.7 and newer

QUESTION 35
Which requirement is important when considering the migration of data using PowerStore Migration?

Number of social media followers

Available Wi-Fi networks

Compatibility with source systems

Amount of RAM in the server

QUESTION 36
Which component of PowerStore is responsible for managing data placement and optimizing performance?

Data nodes

Storage media

Networking cards

Management console

QUESTION 37
Which role is responsible for managing data protection and recovery operations in PowerStore?

Storage administrator

Network administrator

Security analyst

System architect

QUESTION 38
A customer has a new PowerStore T system that has been running for 45 days with multiple host systems attached. A user with the storage administrator role attempts to create a volume for a host, but the option is unavailable.
What is the cause?

Appliance has reached the 90% full threshold

The host is incorrectly zoned

Permanent license has not been applied

Incorrect privileges are assigned

QUESTION 39
Which two statements are true regarding host group configurations? (Choose two.)

Allows mixed protocol type hosts within the same host group.

Maps volumes to all hosts in the host group.

Allows mapping volumes to individual hosts in the host group.

Volume-related operations are made across all hosts in the group.

Loading …

The EMC D-PST-DY-23 exam covers a wide range of topics, including installation and configuration of Dell PowerStore systems, management of storage resources, data protection and disaster recovery, and advanced troubleshooting techniques. Candidates will be required to demonstrate their proficiency in these areas through a variety of question types, including multiple-choice, drag and drop, and simulation-based questions.

EMC D-PST-DY-23 Official Cert Guide PDF: https://www.real4prep.com/D-PST-DY-23-exam.html