[Q30-Q52] Use Real NS0-593 - 100% Cover Real Exam Questions [May-2024]

NEW QUESTION 30
Which two throughput elements are controlled by host applications? (Choose two.)

operation size

Jitter

concurrency

latency

NEW QUESTION 31
After users start reporting the Inability to create new flies in a CIFS share, you find EMS events for
wafl.dir.size.max logged for the volume of the SVM to which the share points.
In this scenario, which action should you take to solve this issue?

Delete unneeded files from the directory.

Move the volume to a different aggregate.

Increase the maximum numberof files for the volume.

Increase the maximum directory size for the volume.

NEW QUESTION 32
Which two automation methods does NetApp ONTAP Select support? (Choose two.)

REST

Anslble

Docker

PHP

NEW QUESTION 33
Your customer has deployed a two petabyte NetApp ONTAP FlexGroup volume across their 4-node ONIAP 9.8 cluster. They plan to store over three billion files. They want to prevent file 10 conflicts since files are placed into the FlexGroup volume.
In this scenario, which two NFS SVM parameters should be enabled? (Choose two.)

-v3-64bit-identifiers

-v4-fsid-change

-v3-fsid-change

-v4-64bit-idantifiers

NEW QUESTION 34
After a normal power down of both nodes for building maintenance, Node01 of a 2-node cluster cannot be powered back up; however, all disk shelves are powered.
Which action should be performed to bring the cluster online and allow Node02 to serve data?

Recreate the cluster with the system configuration recovery cluster recreate -from node command.

Reboot the node With the system node reboot -node Node02 -bypass-optimization true command.

Perform a takeover with the storage failover takeover -ofnode Node01 -option force command.

Reinitialize the cluster with option 4a from the boot menu.

NEW QUESTION 35
You have a 2-node NetApp FAS2750 switchless cluster with twenty-four 1.8 TB disks that is experiencing performance issues. Upon investigation, you discover several type B consistency points.

Referring to the exhibit, which corrective action would address these consistency points?

Create additional data LIFs.

Convert the 2-node switchless cluster to a 2-node switched cluster.

Add an additional shelf of twenty-four 1.8 TB disks.

Replace the twenty-four 1.8 TB disks with twelve 4 TB disks.

A type B consistency point (CP) is triggered when the NVRAM buffer is full and needs to be flushed to disk. A type B CP indicates that the write workload is higher than the disk throughput, and the system is experiencing back pressure1 A switchless cluster is a cluster configuration that does not use external switches for cluster interconnect and management network. A switchless cluster has lower bandwidth and redundancy than a switched cluster, and is limited to two nodes2 The exhibit shows the output of the sysstat -x command, which displays the system performance statistics in extended mode. The output shows that the system has high CPU utilization, high disk utilization, high NVRAM utilization, and several type B CPs. These are signs of performance issues and resource contention3 The best corrective action to address these consistency points is to add an additional shelf of twenty-four 1.8 TB disks. This will increase the disk capacity and throughput, and reduce the disk utilization and the frequency of type B CPs4 Creating additional data LIFs will not address the consistency points, because the data LIFs are used for data access protocols, not for NVRAM flushing5 Converting the 2-node switchless cluster to a 2-node switched cluster will not address the consistency points, because the cluster interconnect and management network are not related to the disk performance6 Replacing the twenty-four 1.8 TB disks with twelve 4 TB disks will not address the consistency points, because the disk throughput will not increase, and the disk utilization will remain high7 Reference:
1: Where can I learn more about Consistency Points? – NetApp Knowledge Base 2: ONTAP 9 – Cluster and SVM Peering Express Guide – The Open Group 3: ONTAP 9 – Commands: Manual Page Reference – The Open Group 4: ONTAP 9 – Hardware Universe – The Open Group 5: ONTAP 9 – Network Management Guide – The Open Group 6: ONTAP 9 – Clustered Data ONTAP Concepts Guide – The Open Group 7: ONTAP 9 – Logical Storage Management Guide – The Open Group

NEW QUESTION 36
A 2-node cluster hosts only NAS data UFs. Allnodes lose access to the cluster network.

Referring to the exhibit, which statement is correct?

Both nodes race to takeover the other, one node will takeover the other node.

No takeover event will occur and NAS data UFs will not be accessible.

All nodes in the cluster reset and NAS data UFs are not accessible after reboot.

NAS data UFs are accessible on only the node that has Epsilon.

NEW QUESTION 37
A customer reports that some of their client computers are unable to access a FlexGroup over CIFS. This
problem involves only their older Windows XP clients and some printers and scanners.
In this scenario, which statement Is correct?

FlexGroup requires CIFS shares to be located in qtrees, which these clients do not support.

FlexGroup requires CIFS shares to use the Continuously Available Feature, which these clients do not
support.

These systems use the SMQI protocol which Is an unsupported feature in FlexGroup

These systems use Offloaded Data Transfer, which is an unsupported feature in FlexGroup.

NEW QUESTION 38
You have a NetApp ONTAP cluster consisting of four NetApp FAS8200 controllers with two NetApp CN1610 cluster switches running ONIAP 9.8 software. You are receiving several alert messages stating that the cluster network has degraded. After troubleshooting, you determine that the errors are being generated from Node 2, interface e0b.
In this scenario, what should you do first to solve this problem?

Replace the Twinax cable between Node 2, Interface e0b. and the NetApp CN1610 switch.

Replace the motherboard on Node 2.

Replace both NetApp CN1610 switches.

Replace the NetApp CN1610 switch that connects to Node 2, interface e0b.

NEW QUESTION 39
Your customer mentions that they have accidentally destroyed both rootaggregates in their two-node cluster.
In this scenario, what are two actions that must be performed? (Choose two.)

Rejoin the second node to the re-created cluster.

Re-create the cluster from the local backup.

Install ONTAP from a USB device.

Re-create the cluster from the remote backup.

NEW QUESTION 40
A customer calls you to troubleshoot a network issue. The customer wants to create a packet trace for allclients
on the 192.168.9.0/24 subnet.

Referring to the exhibit, on which interface do you have to run the packet trace?

a0a-322

e2a-100

e2a-1092

a0a-456

NEW QUESTION 41
After a motherboard replacement on a NetApp AFF A300 in a SAN environment, the customer states that
ports 0e and 0f are unable toconnect to the fabric. The ports report “offline”.
What would you examine first to troubleshoot the issue?

vserver fcp wwpn-alias show command output

system node hardware unified-connect show command output

storage port show command output

vserver fcp interface show command output

NEW QUESTION 42
A customer reports that while Installing Windows updates on their external Vscan servers, clients could not access any files on their CIF-S SVM. The problem disappeared after the update process was completed. The customer wants to prevent this issue from happening during the next patch window.
In this scenario, what are two ways to accomplish this task? (Choose two.)

Enable the -scan-mandatory flag in the Vscan policy.

Update the Vscan servers one at a time.

Modify the CIFS shares to be continuously available (CA) shares.

Disable the -scan-mandatory flag in the Vscan policy.

NEW QUESTION 43
Your customer is running a NetApp AFF A800 system with NetAppONTAP 9.8 software and states that their
NS224 shelf is not showing with the correct shelf ID. You analyze the data and the shelf shows an
identification of “1.SHFHUXXXXXXXXXX.”
What is the cause of the reported Issue?

The shelf has been power cycled.

A new shelf was added to the controller.

The shelf had a disk replaced too quickly.

The shelf was cabled Incorrectly.

NEW QUESTION 44
Refer to the exhibit.

Referring to the exhibit, what do you need to do to return the MetroCluster to a normal state?

Enter the metroclustor switchback command on Site B.

Enter the metrocluster switchback command on Site A.

Enter the storage failover giveback command on Site B.

Enter the storage failover giveback command on Site A.

NEW QUESTION 45
A customer’s storage administrator Informs you about the deactivated Automatic Switchover (AUSO) feature
on their MetroCluster IP environment.
What Information would you tell your customer in this scenario?

The AUSO feature cannot be activated due to a non-mirrored aggregate.

The AUSO feature is not available in Metrocluster IP installations by design.

A faulty link automatically deactivated the AUSO feature.

This is a configuration failure, you can activate that feature for the customer.

NEW QUESTION 46
You receive the “Unable to connect to the management gateway server” error when trying to connect to a node management IP.
In this situation, how do you determine whether core dumps are generated for the mgwd user space process?

Log in to the nodeshell using the node console and collect the core dumps from the nodeshell.

Log in to the service processor and collect the core dumps from the service processor.

Log in to the clustershell using the node console and collect the core dumps from the clustershell.

Log in to the systemshell and collect core dumps from the systemshell.

NEW QUESTION 47
A user reports that a colleague saved a file called Test.txt from a UNIX system to a multiprotocol volume.
When opening the file later from a Windows system, it was not the file that they wanted. The file that they
wanted was named TEST~1.TXT.
Which statement explains this behavior?

UNIX name mapping updated the filename.

A Snapshot copy preserved two versions of the file.

Windows Volume Shadow Copy Service stored an older version of the file.

Case Insensitivity of SMB clients caused the file to be displayed with a different name.

NEW QUESTION 48
A customer is calling you to troubleshoot why users are unable to connect to their CIFS SVM.

Referring to the Information shown in the exhibit, what Is the source of the problem?

Thev1db database is offline.

The aggregate aggr2 has a failed disk.

The databases On Node03 must be Switched from secondary to master.

The broken disk in Node03 is the source of the problem.

NEW QUESTION 49
You ate connecting a Windows Server 2019 hostto ISCSI LUNs on a 4-node AFF A250 cluster running
NetApp ONIAP 9.8 software. The host is unable to connect to the target interface, and the ONTAP event log
has the message shown below.
ISCSI: network interface identifier disabled for use; incoming connection discarded
In this scenario, what is the cause of this connection issue?

iSNS is not enabled on the storage virtual machine.

The WWPN was not added to the initiator group.

The iSCSI service is not enabled on the interface.

CHAP isnot configured correctly for the specified initiator.

NEW QUESTION 50
You have a customer who is concerned with high CPU and disk utilization on their SnapMirror destination
system. They are worried about high CPU and disk usage without any user operations.
In this situation, what should you tell the customer?

Suggest that the customer manually cancel any scanners on the destination to reduce CPU usage.

Explain that background tasks such as SnapMirror throttle up in the absence of user workload.

Suggest that the customer throttle their SnapMirror relationships to reduce resource consumption.

Explain that only user workload should use the CPU and Investigate further.

NEW QUESTION 51
You receive the “Unable to connect to the management gateway server”error when trying to connect to a node
management IP.
In this situation, how do you determine whether core dumps are generated for the mgwd user space process?

Log in to the nodeshell using the node console and collect the core dumps from the nodeshell.

Log in to the service processor and collect the core dumps from the service processor.

Log in to the clustershell using the node console and collect the core dumps from the clustershell.

Log in to the systemshell and collect core dumps from thesystemshell.

NEW QUESTION 52
After expanding a two-node AFF A300 cluster with two AFF A700 nodes, you observe latencies when data is accessed indirectly. The system node run -node -command netstat command shows retransmits and packet drops on the LIFs. The AFF A700 nodes with 40 Gbps and the AFF A300 connect with 10 Gbps to the cluster interconnect. You are using Cisco Nexus 3132Q cluster interconnect switches. You just updated to ONTAP 9.8 software.
In this scenario, what is causing this problem?

The 10 Gbps to 10 Gbps cluster Interconnect is creating a speed mismatch.

AFF A300 and AFF A700 node mixing Is not supported in ONTAP 9.8 software.

The AFF A300 Is using an adapter card for the cluster Interconnect, but only onboard ports are supported.

There is an NXOS firmware mismatch, verify in the Interoperability Matrix (1MTJ for a supported version.