Latest 156-835 Exam Dumps CheckPoint Exam from Training Expert Real4Prep [Q16-Q38]

Rate this post

Latest 156-835 Exam Dumps CheckPoint Exam from Training Expert Real4Prep

Pass CheckPoint Check Point Certified Maestro Expert PDF Dumps | Recently Updated 66 Questions

Q16. Which command will be used in order to restart Orchestrator service only?

orchd restart

cpstop; cpstart

reboot

service orchestrator restart

Page 313 from the training manual:
– Restart the service:
orchd restart
– Restart the service without confirmation
service orchd restart

Q17. How many power supplies are presented on MHO-170?

1 with option for 2

Q18. In case of Correction, where is information about Owner stored?

In Connection tables of all Appliances participating in Correction Layer flow

In Correction tables of all Appliances participating in Correction Layer flow

In Correction table of Target Appliance

In Connection table of Target Appliances

Q19. For a VSX configuration – Which statement is wrong?

All Virtual Systems exist on the SMO

All Virtual Systems exist on all Appliances

VSX configuration is the same on all Appliances within the same Security Group

Each Appliance owns different Virtual Systems

Q20. Complete the sentence: Orchestrators works as…

Active-Active cluster

Hot-Swap RAID

Active-Standby cluster

Load Sharing cluster

Q21. Which licenses should be issued for the Orchestrator?

No licenses are required for Orchestrator

The Orchestrator is considered a Management server, hence it’s licensed the same way

The Orchestrator requires NGTX license

Depends on Software Blades enabled on connected appliances

Q22. What is the default Distribution mode?

User

Auto-topology

Manual-General

Network

In Check Point firewall, the default Distribution mode is Auto-topology. Auto-topology uses the built-in algorithm to automatically determine the best way to distribute the traffic across the firewall cluster, based on the topology of the network and the current load on the cluster members.
Auto-topology takes into account the available bandwidth and the CPU utilization of each cluster member, and then makes decisions on how to distribute the traffic across the cluster in real-time. It is a dynamic and adaptive mode that ensures the best use of the available resources and the highest level of performance.

Q23. What is the difference between Dual-Site and Multi-Room?

Multi-Room is a Single-Site deployment where all Appliances are connected to both orchestrators

Multi-Room is a kind of Dual-Site deployment within the same building

Multi-Room is Active / Standby and Dual-Site is Active / Active

This is the same

Q24. For a VSX configuration – Which statement is wrong?

All Virtual Systems exist on the SMO

All Virtual Systems exist on all Appliances

VSX configuration is the same on all Appliances within the same Security Group

Each Appliance owns different Virtual Systems

Q25. When running ifconfig command on an Appliance, there are interfaces shown in the list: ethl-Sync and eth2-Sync. What is the purpose of these interfaces?

These interfaces are bond members (slaves) of Sync Bond

These interfaces can be used as backup for Sync interface

These interfaces are not in use. Security GW module use Sync interface for synchronization

These interfaces represent physical Sync interface at the front panel of appliance

Q26. What is the maximum amount of Appliances within the same Security Group?

Q27. What cannot be a reason for “Failed to get remote orchestrator interfaces” error message, when clicking on “Orchestrator” in WebUI?

Remote orchestrator has no empty interfaces

One orchestrator only, but Orchestrator amount is 2 or no Sync in between orchestrators

No Sync between orchestrators

Single orchestrator environment, but configured Orchestrator amount is 2

Q28. One single Appliance supports 1M concurrent connections. How many concurrent connections will support Security Group of 2 Appliances?

500K

One single Appliance supports 1M concurrent connections, so a Security Group of 2 Appliances will support 2M concurrent connections.
https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk91380 How to troubleshoot Gaia Portal (WebUI)
https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk91380
https://downloads.checkpoint.com/dc/download.htm?ID=103853
VSX R81 Administration Guide
https://downloads.checkpoint.com/dc/download.htm?ID=103853
https://sc1.checkpoint.com/documents/Jumbo_HFA/R81.10/R81.10/R81.10-List-of-all-Resolved-Issues.htm List of All Resolved Issues and New Features
https://sc1.checkpoint.com/documents/Jumbo_HFA/R81.10/R81.10/R81.10-List-of-all-Resolved-Issues.htm

Q29. What is the max amount of Orchestrators in Dual-site setup?

2 per Security Group

4 per Security Group

Q30. Which command will be used in order to restart Orchestrator service only?

orchd restart

cpstop; cpstart

reboot

service orchestrator restart

Q31. What is a downlink interface used for?

To connect Orchestrators to customer’s infrastructure

To connect appliances to customer’s infrastructure

To connect appliances to Orchestrators

To connect in between Orchestrators

Q32. What is a Security Group?

Logical group of computer and network resources

Group of security administrators

Group of security gateways

Group of appliances with enabled NGTX software blades

Q33. There’s a 23800 appliance with quad NIC in slot 5. What would be the name of port 3 on this NIC?

ethBP3-05

ethsBP5-03

ethsBP3-05

ethsBP-05

Q34. What is the basic installation sequence of the Orchestrator in case of single Orchestrator?
1. Create a Security Group
2. Configure Default Gateway
3. Connect with Serial Console cable to the Orchestrator
4. Configure IP for one of its Management interfaces
5. Connect an appliance to a downlink port
6. Change Orchestrator amount to 1
7. Browse to the Orchestrator’s WebUI

3-4-2-6-5-7-1

3-1-7-2-4-6-5

1-4-2-5-7-3-6

7-4-2-5-3-1-6

Q35. How many power supplies are presented on MHO-140?

1 with option for 2

Q36. What is the maximum amount of Appliances within Security group in Dual-Site configuration?

Q37. What is the minimal requirement for a Security Group?

1 Appliance and 1 management port

2 Appliances and 2 ports

1 Appliance and 1 administrator with Multi-Domain admin permissions

None, it may be empty.

Q38. What is the minimal amount of cables needed in order to connect an Appliance to an Orchestrator?

Three cables: uplink, downlink, SYNC

One Downlink cable only

Two cables: one uplink and one downlink

Four cables: uplink, downlink, SYNC and Management

Loading …

Updated Test Engine to Practice 156-835 Dumps & Practice Exam: https://www.real4prep.com/156-835-exam.html

156-835

Pass CheckPoint 156-835 Actual Free Exam Q&As Updated Dump Feb 14, 2023 [Q26-Q45]

admin February 14, 2023 0 Comment

Pass CheckPoint 156-835 Actual Free Exam Q&As Updated Dump Feb 14, 2023 Latest 156-835 Actual Free Exam Updated 66 Questions What is the exam cost of the…

Real Exam Prep Dumps

Latest 156-835 Exam Dumps CheckPoint Exam from Training Expert Real4Prep [Q16-Q38]

Leave a Reply Cancel reply

Related Posts

[2026] Use Valid New Free 156-315.82 Exam Dumps & Answers [Q47-Q68]

CheckPoint 156-560 Real Exam Questions Guaranteed Updated Dump from Real4Prep [Q19-Q39]

Pass CheckPoint 156-835 Actual Free Exam Q&As Updated Dump Feb 14, 2023 [Q26-Q45]

New 2023 Realistic Free CheckPoint 156-835 Exam Dump Questions & Answer [Q21-Q37]

Leave a Reply Cancel reply