216 Exam Questions for MTCNA Updated Versions With Test Engine [Q101-Q116]

Rate this post

216 Exam Questions for MTCNA Updated Versions With Test Engine

Pass MTCNA Exam with Updated MTCNA Exam Dumps PDF 2025

Passing the MTCNA certification exam requires adequate preparation and training. MikroTik offers MTCNA training courses that cover all the topics required for the exam. The training is delivered by certified trainers and covers hands-on lab sessions that help participants gain practical experience in configuring MikroTik routers. MikroTik Certified Network Associate Exam certification provides numerous benefits such as recognition of skills, enhanced credibility, and better job prospects.

NEW QUESTION 101
Which of the following is used in standard 802.11 wireless networks?

CSMA/CA

CDMA

FDD

CSMA/CD

NEW QUESTION 102
Which of the following are valid IP addresses?

10.10.14.0

192.168.256.1

192.168.13.255

1.27.14.254

NEW QUESTION 103
Consider the following network diagram. In R1, you have the following configuration:
/ip route
add dst-address=192.168.1.0/24 gateway=192.168.99.2
/ip firewall nat
add chain=srcnat out-interface=Ether1 action=masquerade
On R2, if you wish to prevent all access to a server located at 192.168.1.10 from LAN1 devices, which of the following rules would be needed?

/ip firewall filter add chain=forward srcaddress=192.168.99.1 dst-address=192.168.1.10 action=drop

/ip firewall filter add chain=forward srcaddress=192.168.0.0/24 dst-address=192.168.1.10 action=drop

/ip firewall filter add chain=input srcaddress=192.168.99.1 dst-address=192.168.1.10 action=drop

/ip firewall nat add chain=dstnat srcaddress=192.168.99.1 dst-address=192.168.1.10 action=drop

NEW QUESTION 104
What wireless card can we use to achieve 100 Mbps actual wireless throughput?

802.11 b/g

802.11 a/b/g

802.11 a

802.11 a/n

802.11 a/b/g/n

NEW QUESTION 105
What is necessary for PPPoE client configuration?

Interface (on which PPPoE client is going to work)

Static IP address on PPPoE client interface

ip firewall nat masquerade rule

NEW QUESTION 106
Which of the following keystrokes enables safe mode in console:

Ctrl+x

Ctrl+c

Ctrl+d

Ctrl+s

NEW QUESTION 107
Which one of the following is true regarding VLANs?

Two VLANs are configured by default on all Cisco switches.

VLANs only work if you have a complete Cisco switched internetwork. No off-brand switches are allowed.

You should not have more than 10 switches in the same VTP domain.

VTP is used to send VLAN information to switches in a configured VTP domain.

NEW QUESTION 108
How many collision domains are created when you segment a network with a 12-port switch?

NEW QUESTION 109
What protocol is used for Ping and Trace route?

DHCP

TCP

ICMP – ping

UDP – trace route

NEW QUESTION 110
One host on an internal network is accessing an external web page through a MikroTik router that is doing source NAT. Select correct statement about the packets that flow from that web page to the host ?

Packets go through the input chain

Packets go through the forward chain

Packets go through the output chain

Packets go through the input chain before the routing decision and after that through output chain

NEW QUESTION 111
It is possible to create an encrypted PPPoE tunnel in RouterOS:

true

false

NEW QUESTION 112
What does the firewall action “log” do?

It logs and blocks the packet

It blocks and logs the packet

It adds a prefix to the packet and passes it through

It logs the packet

NEW QUESTION 113
/interface wireless access-list is used for

Handles a list of Client’s MAC Address to permit/deny connection to AP

Shows a list of Client’s MAC Address that are already registered at AP

Contains the security profiles settings

Authenticate Hot-Spot users

NEW QUESTION 114
In the Route List, the identification DAb for a route stands for

direct – active – bgp

direct – acknowledge – backup

dynamic – active – backup

dynamic – active – bgp

NEW QUESTION 115
Firewall NAT rules process only the first packet of each connection.

True

False

NEW QUESTION 116
Router A and B are both running as PPPoE servers on different broadcast domains of your network. It is possible to set Router A to use “/ppp secret” accounts from Router B to authenticate PPPoE customers.

true

false

Loading …